RE 30126-B/09.13 | Installation and Operation
1.2
Scope of Supply
1.3
Requirements
The equipment is packed in anti-static packaging to protect the controller card from
electrostatic discharge. Observe instructions on the top side of the packaging.
Included in the shipment:
Controller Card VRPD
RE sheet RE 30 126-B
Mounting the controller card in a card holder
VT 3002-2x/G64
described in datasheet RE 29 928.
The card holder should be used only inside a control cabinet, as there is no protection
from accidental contact.
If no power is provided by the user, the following power supply is available as an op-
tion:
VT-NE30
described in datasheet RE 29 929.
Hydraulics | Bosch Rexroth AG
7/32
General 1