Location And Function Of Controls; Rear Panel Terminology; Front Panel Terminology - Barco R9002129 Owner's Manual

2

LOCATION AND FUNCTION OF CONTROLS

Rear Panel Terminology

RS232IN RS232OUT
1 2
RS232IN
1
Connection between the projector and an IBM PC (or
compatible) or MAC (RS422) for remote computer control
and data communication.
RS232OUT
2
Used to connect to the next projector, RS232IN plug
(communication link for PC or MAC to the next projector)
IR sensor
3
receiver for control signals transmitted from the RCU.
Communication port (800 peripherals)
4
* allows communication between the RCVDS switcher and
the projector.
* allows connection of a remote IR receiver unit to the
projector.
* allows connection of an IRIS 800 to converge the image
automatically.
IR Remote
5
remote input for wired remote control

Front Panel Terminology

AUTODIAGNOSIS DISPLAY
1
LED indication for service purposes.
POWER (MAINS) SWITCH : press the switch to turn the
2
projector ON.
Depending on the hardware set-up of the projector during
installation, the projector switches to 'standby' or to
'operational mode'. If in standby, the standby led in the
autodiagnosisdisplay lights up.
5975977A BARCODATA 708 260597
COMM PORT
R G(S) B
IR
REMOTE
S VIDEO
(800 peripherals)
R-Y Y(S) B-Y
3 4 5
6 7
1
S-VIDEO
8
RGB-S IN or (R-Y)Y(B-Y)-S IN (4x BNC connector) :
6
RGB-S in : allows a character generator, microcomputer,
video camera, etc. having analog RGB output to be con-
nected to the projector.
Line inputs:
(R-Y)Y(B-Y)-S IN (component in):allows to connect e.g. a
professional VCR having component outputs to the projec-
tor.
Line inputs
VIDEO IN (Composite video, 1x BNC connector) : allows a
7
video tape recorder, video camera, color receiver/monitor,
etc. having video line output to be connected to the projector.
S-VIDEO IN : Separated Y/C (luma-chroma) signal inputs
8
and outputs for higher quality playback of Super VHS signals
(4-pin S-VIDEO connector).
2 3 4
POWER (MAINS) INPUT : Connect the supplied ac power
3
(mains) cord here and to wall the outlet.
IR SENSOR
4
receiver for control signals transmitted from the RCU700.
Location and Function of Controls
- signals RED-GREEN-BLUE
- COMPOSITE sync. signal
- signals RED-LUMA, LUMA, BLUE-LUMA
- COMPOSITE sync. signal
2-1