Attaching Labels - Brother P-Touch 3600 User Manual

To uninstall the printer driver:
1 Disconnect the USB cable from the USB
port on the P-touch.
2 Double-click the Applications folder on the
Macintosh HD to open it.
3 Double-click the Utilities folder to open it.
4 Double-click the Print Center icon to start
up Print Center.
5 Check that "PT-9600/3600" does not appear
in the Printer List. If it is listed, select it, and
then click the Delete button to delete it.
6 Quit Print Center.
7 In the Library folder, open the Printers
folder, and then open the Brother folder.
8 Drag the following to the Trash icon.
• PT9600/3600PDE.plugin
• PT9600/3600PM.plugin

Attaching labels

● ● ● ● ● ● ● ● ● ● ●
Laminated tape
The backing from labels printed on laminated
tapes can easily be removed if an Auto Cut set-
ting with a half cut (1, 3, 5 or 7) was used (refer
to page 62).
Non-laminated tape
Labels printed on non-laminated tapes can be
folded in half so that the inside edges of the two
backing pieces come off the label, enabling the
backing to easily be peeled off.
Iron-on transfer tape
Iron-on transfer tape is used to transfer your text
onto garments using an iron.
1 Insert an iron-on transfer tape cassette, press
p to print the text and cut off the label.
2 Iron the garment to flatten it before transfer-
ring the text.
3 Place the label on the garment at the loca-
tion where you wish the text to be trans-
ferred.
4 Set the iron to cotton (302 to 356 °F (150 to
180 °C)), and then press down on the label
with the iron for about 15 seconds.
5 Allow the iron-on transfer to cool (for about
60 seconds), and then carefully remove the
backing paper.
Ch. 2 Getting Started
● ● ● ● ● ● ● ● ● ● ●
33
●