Installing The Software & Printer Driver - Brother P-Touch 3600 User Manual

To connect a computer to the P-touch
through the USB port:
1 Insert the flat (A) connector on the USB
cable into the USB port on the computer.
2 Insert the square (B) connector on the USB
cable into the USB port on the right side of
the P-touch.
3 Turn on the P-touch.
P-touch 9600:
P-touch 3600:
After the P-touch is connected to a computer
using a USB cable, the P-touch enters Interface
mode when data is sent to it from the computer.
NOTE
☞
To exit Interface mode for a USB connection
and return to the text, press any key.
☞
The P-touch cannot enter Interface mode for a
USB connection while it is printing, feeding
tape or in Interface mode for an RS-232C con-
nection (PT-9600 only) or while a macro is
being assigned to a PF key (PT-9600 only).
1 2 3 4 5 6 7 8 9 A B C D E F K Q Q Q Q Q
R
R
G
INTERFACE
R
H
R
R I
R
J
AUTO 1.00
Length Margin
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q
HELSINKI A AUTO
Font Width Size
Installing the Software &
Printer Driver
● ● ● ● ● ● ● ● ● ● ●
In order to provide even more illustration and
layout features to the label-making possibilities
available with your P-touch, two applications
are available on the enclosed CD-ROM: P-
touch Editor 3.2 and P-touch Quick Editor. With
either application, the printer driver must also
be installed in order to print labels from the P-
touch.
On a Computer Running
®
Windows
Before installation
Check that your system configuration meets the
following requirements.
Computer: IBM PC or compatible.
Operating system: Pre-installed with Microsoft
®
Windows 98, 98 SE, Me, 2000 Professional or
XP
NOTE
☞
For installation on Windows
tor privileges are required. In addition, printing
requires power user or administrator privileges.
This software cannot be operated in Users
groups. In addition, this software is not compat-
ible with the Windows
system.
®
☞
With Windows XP, printing and installation is
only possible from an account with administra-
tor privileges. These operations cannot be per-
formed from an account with limited privileges.
Hard disk free space: At least 20 MB (100 MB
for a full installation)
NOTE
Up to 100 MB of hard disk free space may be
needed when printing long labels or large amounts
of data.
Memory: At least 64 MB
Monitor: VGA or higher graphics card
USB port
CD-ROM drive
Ch. 2 Getting Started
● ● ● ● ● ● ● ● ● ● ●
®
®
2000, administra-
®
2000 Server operating
●
9