Attaching Labels - Brother P-touch 1800 User Manual

LAMINATED TAPE
The enclosed stick enables you to easily remove the backing from labels printed on lami-
nated tapes.
1
Hold the tape in your left hand, with the printed surface facing up, and hold the
stick in your right hand.
2
Pass the tape halfway through the long narrow hole in the stick.
3
Turn the stick three-quarters of a turn towards you and pull the stick away from you
as shown below.
4
Peel off the label backing.
NON-LAMINATED TAPE
Labels printed on non-laminated tapes can be folded in half so that the inside edges of the
two backing pieces come off the label, enabling the backing to easily be peeled off.
8
All manuals and user guides at all-guides.com

ATTACHING LABELS