Brother P-Touch 3600 User Manual page 32

Ch. 2 Getting Started
4 Double-click the Mac OS X folder to open
it.
5 Double-click the Driver Installer icon in the
folder that appears. The installer starts up,
and then the Introduction dialog box
appears.
NOTE
When the Next button is pressed, a message may
appear, warning that an older version of the printer
driver is installed. Be sure to uninstall the older ver-
sion of the printer driver before trying to install the
new driver. For details on uninstalling the printer
driver, refer to To uninstall the printer driver: on
page 33.
6 Click the Next button. A dialog box
appears, allowing you to check the installa-
tion.
7 Check that the installation will be per-
formed as desired, and then click the Install
button. After the printer driver is installed, a
dialog box appears, indicating that the
installation is finished.
24
8 Click the Done button, and then restart the
computer.
Selecting the PT-9600/3600 as the
printer
To select the printer:
With a Mac OS before OS X:
1 Turn on the P-touch 9600/3600.
2 Pull down the Apple menu and select
"Chooser" to display the Chooser window.
3 In the list on the left, click the PT-9600/
3600 icon. Then, select the appropriate
printer from the list on the right.
4 Close the Chooser window to confirm your
settings.
With Mac OS X v10.1 or v10.2:
1 Turn on the P-touch 9600/3600.
2 Double-click the Applications folder on the
Macintosh HD to open it.
3 Double-click the Utilities folder to open it.
4 Double-click "Print Center" to start it up.