Troubleshooting - Brother P-Touch 3600 User Manual

TROUBLESHOOTING

(1) The display stays blank after you have
turned on the machine, or abnormal char-
acters are displayed.
(2) The machine does not print or the printed
characters are blurred.
(3) The text is printed on striped tape.
84
TROUBLESHOOTING
Problem Solution
● Check that the AC adaptor is connected.
● Check that the rechargeable Ni-MH bat-
tery is properly charged. (PT-9600 only)
● Reset the machine by:
- (PT-3600) unplugging the AC adaptor,
and leaving it unplugged for about one
minute, then and plugging it in again
- (PT-9600 only) pressing the reset button
in the battery compartment at the bottom
of the machine
☞
The text and formats in the display will be
erased and under certain circumstances
the entire contents of the memory will be
cleared.
● Check that the tape cassette has been
inserted properly.
● If the tape cassette is empty, replace it
with a new one.
● Make sure that the tape compartment
cover has been closed.
● Check that the interface cable is correctly
connected.
● You have reached the end of the tape in
the cassette. Replace it with a new one.
Reset button