Brother P-Touch 3600 User Manual page 83

3 Press m or g until the desired setting is
displayed.
NOTE
To return the function to its default setting (0), press
the space bar.
4 Press n to apply the setting.
NOTE
To apply several Setup settings at the same time,
continue pressing j or k to select the function,
then pressing m or g to select the desired setting.
Press n only after the necessary functions have
been set.
To change the TAPE LENGTH ADJUST setting:
When printing a label with a specified length
(Tape Length function), the length of the printed
label may be slightly different. This function
allows you to adjust the length of the printed
label.
NOTE
If the tape length cannot be adjusted satisfactorily
using this function, small adjustments can be made
to the tape length using the Tape Length function.
1 Hold down d and press A.
NOTE
This step may be skipped if settings for several
Setup functions are being applied at the same time.
2 Press j or k until TAPE LENGTH
ADJUST is displayed.
1 2 3 4 5 6 7 8 9 A B C D E F K Q Q Q Q Q
R
R
G
04/07
R
H
N
R
TAPE LENGTH ADJUST
L M
R
I
00
R
J
AUTO 1.00
Length Margin
3 Press m or g until the desired setting is
displayed.
NOTE
☞
To return the function to its default setting (0),
press the space bar.
☞
To decrease the label length, select a lower
value. To increase the label length, select a
higher value.
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q
HELSINKI A AUTO
Font Width Size
Ch. 4 Machine Adjustments
4 Press n to apply the setting.
NOTE
To apply several Setup settings at the same time,
continue pressing j or k to select the function,
then pressing m or g to select the desired setting.
Press n only after the necessary functions have
been set.
To change the HEAD ADJUSTMENT setting:
This function allows you to shift the printing up
or down within the tape.
NOTE
This function does not adjust printing on 1 1/2" (36-
mm)-wide tape.
1 Hold down d and press A.
NOTE
This step may be skipped if settings for several
Setup functions are being applied at the same time.
2 Press j or k until HEAD ADJUSTMENT
is displayed.
1 2 3 4 5 6 7 8 9 A B C D E F K Q Q Q Q Q
R
R
G
05/07
R
H
N
R
HEAD ADJUSTMENT
L M
R
I
00
R
J
AUTO 1.00
Length Margin
3 Press m or g until the desired setting is
displayed.
NOTE
☞
To return the function to its default setting (0),
press the space bar.
☞
To shift the printing down, select a lower value.
To shift the printing up, select a higher value.
4 Press n to apply the setting.
NOTE
To apply several Setup settings at the same time,
continue pressing j or k to select the function,
then pressing m or g to select the desired setting.
Press n only after the necessary functions have
been set.
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q Q
Q Q Q
HELSINKI A AUTO
Font Width Size
75