Attaching Labels - Brother P-touch 2400 User Manual

LAMINATED TAPE
The enclosed stick enables you to easily remove the backing from labels printed on laminated
tapes.
1 Hold the tape in your left hand, with the printed surface facing up, and hold the stick in
your right hand.
2 Pass the tape halfway through the long narrow hole in the stick.
3 Turn the stick three-quarters of a turn towards you and pull the stick away from you as
shown below.
4 Peel off the label backing.
NON-LAMINATED TAPE
Labels printed on non-laminated tapes can be folded in half so that the inside edges of the two
backing pieces come off the label, enabling the backing to easily be peeled off.
8

ATTACHING LABELS