Replacing A Front Turn Signal Light Bulb - Yamaha Neo's YN50 Owner's Manual

1. Cowling
2. Headlight coupler
3. Auxiliary light lead connector
4. Remove the headlight
cover.
1. Headlight bulb cover
PERIODIC MAINTENANCE AND ADJUSTMENT
5. Unhook the headlight bulb hol-
der, and then remove the burnt-
out bulb.
1. Headlight bulb holder
bulb
6. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
7. Install the headlight bulb cover.
8. Connect the headlight coupler.
9. Install the cowling.
10. Have a Yamaha dealer adjust the
headlight beam if necessary.
6-22
Replacing a front turn signal
light bulb
NOTICE
It is advisable to have a Yamaha
dealer perform this job.
1. Place the scooter on the centers-
tand.
2. Remove cowling A. (See page
6-6).
3. Remove the socket (together
with the bulb) by turning it coun-
terclockwise.
1. Turn signal light bulb socket
4. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
EAUT1262
ECA10670
6