Related Manuals for Yamaha Neos 4 2013
Summary of Contents for Yamaha Neos 4 2013
- Page 1 Read this manual carefully before operating this vehicle. OWNER’S MANUAL YN50F YN50FM 2AC-F8199-E6...
- Page 2 EAU46091 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.
- Page 3 EAU10114 Welcome to the Yamaha world of motorcycling! As the owner of the YN50F/YN50FM, you are benefiting from Yamaha’s vast experience and newest technology regarding the design and manufacture of high-quality products, which have earned Yamaha a reputation for dependability.
- Page 4 IMPORTANT MANUAL INFORMATION EAU10134 Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
- Page 5 IMPORTANT MANUAL INFORMATION EAUM1012 YN50F/YN50FM OWNER’S MANUAL ©2013 by MBK INDUSTRIE 1st edition, June 2013 All rights reserved Any reprinting or unauthorized use without the written permission of MBK INDUSTRIE is expressly prohibited. Printed in France.
-
Page 6: Table Of Contents
TABLE OF CONTENTS SAFETY INFORMATION ....1-1 FOR YOUR SAFETY – Tires ..........6-14 Further safe-riding points ....1-5 PRE-OPERATION CHECKS .....4-1 Cast wheels ........6-16 Checking the front brake lever DESCRIPTION ........2-1 OPERATION AND IMPORTANT free play........6-17 Left view ......... - Page 7 TABLE OF CONTENTS Troubleshooting ......6-29 Troubleshooting charts ....6-30 SCOOTER CARE AND STORAGE..7-1 Matte color caution ......7-1 Care ..........7-1 Storage ..........7-4 SPECIFICATIONS......8-1 CONSUMER INFORMATION....9-1 Identification numbers.....9-1...
-
Page 8: Safety Information
SAFETY INFORMATION Never operate a scooter without accidents have been caused by EAUT1019 proper training or instruction. Take an automobile driver who did not training course. Beginners see the scooter. Making yourself Be a Responsible Owner should receive training from a cer- conspicuous appears to be very As the vehicle’s owner, you are re- tified instructor. - Page 9 SAFETY INFORMATION Many accidents involve inexperi- • Always signal before turning or Protective Apparel enced operators. In fact, many op- changing lanes. Make sure that The majority of fatalities from scooter erators who have been involved in other motorists can see you. accidents are the result of head inju- ...
- Page 10 SAFETY INFORMATION Do not run engine outdoors where Cargo and accessory weight Avoid Carbon Monoxide Poisoning All engine exhaust contains carbon engine exhaust can be drawn into should be kept as low and close to monoxide, a deadly gas. Breathing a building through openings such the scooter as possible.
- Page 11 Yamaha accessories, which are avail- characteristics can put you and others effects. Wind may attempt to lift able only from a Yamaha dealer, have at greater risk of serious injury or the scooter, or the scooter may been designed, tested, and approved death.
-
Page 12: Further Safe-Riding Points
SAFETY INFORMATION Aftermarket Tires and Rims cation for the straps carefully so EAU57600 Further safe-riding points The tires and rims that came with your the straps will not rub against Be sure to signal clearly when scooter were designed to match the painted surfaces during transport. - Page 13 SAFETY INFORMATION Always wear a helmet, gloves, trousers (tapered around the cuff and ankle so they do not flap), and a brightly colored jacket. Do not carry too much luggage on the scooter. An overloaded scoot- er is unstable. Use a strong cord to secure any luggage to the carri- er (if equipped).
-
Page 14: Description
DESCRIPTION EAU10411 Left view 1. Storage compartment (page 3-12) 2. Final transmission oil filler cap (page 6-11) 3. Brake lever free play adjusting nut 4. Final transmission oil drain bolt (page 6-11) 5. Kickstarter (page 3-11) 6. Air filter element (page 6-13) 7. -
Page 15: Right View
DESCRIPTION EAU10421 Right view 1. Grab bar (page 5-2) 9. Coolant reservoir (page 6-12) 2. Fuel tank cap (page 3-8) 10.Engine oil dipstick (page 6-8) 3. Seat (page 3-11) 11.Centerstand (page 6-21) 4. Battery (page 6-23) 5. Fuses (page 6-25) 6. -
Page 16: Controls And Instruments
DESCRIPTION EAU10431 Controls and instruments 1. Rear brake lever (page 3-7) 2. Left handlebar switches (page 3-6) 3. Multi-function display (page 3-3) 4. Right handlebar switch (page 3-6) 5. Throttle grip (page 6-14) 6. Front brake lever (page 3-7) -
Page 17: Instrument And Control Functions
INSTRUMENT AND CONTROL FUNCTIONS To lock the steering EAU10462 EAU47792 Main switch/steering lock (off) All electrical systems are off. The key can be removed. EWA15351 WARNING Never turn the key to “ ” or “ ” while the vehicle is moving. Other- wise the electrical systems will be switched off, which may result in loss of control or an accident. -
Page 18: Indicator Lights And Warning Lights
2. Turn. or if the warning light remains on, have 1. Coolant temperature warning light “ ” a Yamaha dealer check the electrical Push the key in, and then turn it to “ ” 2. High beam indicator light “... -
Page 19: Multi-Function Display
The speedometer digits display gine is not working correctly. If this oc- from 0 to 80, and then from 80 to curs, have a Yamaha dealer check the 0 in kilometers. If the speedometer self-diagnosis system. is set to miles, the digits will dis- play from 0 to 50, and then from 50 to 0. - Page 20 INSTRUMENT AND CONTROL FUNCTIONS All LCD segments and warning 3. To change the minutes digits, lights come on and then go off. push the “RESET/SELECT” but- Be sure to turn the key to “ ” be- ton for at least three seconds. EWA12313 fore using the “RESET/SELECT”...
- Page 21 INSTRUMENT AND CONTROL FUNCTIONS Odometer and tripmeter modes Oil change indicator “OIL CHANGE” Pushing the “RESET/SELECT“ button This indicator comes on at the initial switches the display between the 1000 km (600 mi), then at 3000 km odometer mode “ODO” and the trip- (1800 mi) and every 3000 km (1800 mi) meter “TRIP”...
-
Page 22: Handlebar Switches
If a problem is detected in the fuel elec- trical circuit, all LCD segments of the fuel gauge and the fuel level warning indicator will flash alternately. If this oc- curs, have a Yamaha dealer check the vehicle. 1. Start switch “ ”... -
Page 23: Front Brake Lever
INSTRUMENT AND CONTROL FUNCTIONS EAU12401 EAU12902 EAU12952 Dimmer switch “ ” Front brake lever Rear brake lever Set this switch to “ ” for the high beam and to “ ” for the low beam. EAU12461 Turn signal switch “ ”... -
Page 24: Fuel Tank Cap
INSTRUMENT AND CONTROL FUNCTIONS To install the fuel tank cap EAU13193 EAU13222 Fuel tank cap Fuel 1. Insert the fuel tank cap into the Make sure there is sufficient gasoline in tank opening and turn it clock- the tank. wise. EWA10882 WARNING Gasoline and gasoline vapors are... - Page 25 WARNING as well as to the exhaust system. Gasoline is poisonous and can Your Yamaha engine has been de- cause injury or death. Handle gaso- signed to use premium unleaded gas- line with care. Never siphon gasoline oline with a research octane number of by mouth.
-
Page 26: Fuel Tank Overflow Hose
INSTRUMENT AND CONTROL FUNCTIONS EAU58300 EAU13434 ECA10702 Fuel tank overflow hose Catalytic converter NOTICE This model is equipped with a catalytic Use only unleaded gasoline. The use converter in the exhaust system. of leaded gasoline will cause unre- EWA10863 pairable damage to the catalytic WARNING converter. -
Page 27: Kickstarter
INSTRUMENT AND CONTROL FUNCTIONS EAU13681 EAU13933 Kickstarter Seat To open the seat 1. Place the scooter on the center- stand. 2. Insert the key into the main switch, and then turn it counterclockwise to “OPEN”. 1. Seat open position 1. Kickstarter lever To close the seat 1. -
Page 28: Storage Compartment
INSTRUMENT AND CONTROL FUNCTIONS Since the storage compartment Do not leave your scooter unat- EAUM1193 Storage compartment accumulates heat when ex- tended with the seat open. posed to the sun and/or the en- gine heat, do not store anything susceptible to heat, consum- ables or flammable items inside ... -
Page 29: Luggage Hook
INSTRUMENT AND CONTROL FUNCTIONS EAUT1073 Luggage hook EWAT1032 WARNING Do not exceed the load limit of 3 kg (7 lb) for the luggage hook. Do not exceed the maximum load of 163 kg (359 lb) for the ve- hicle. -
Page 30: For Your Safety - Pre-Operation Checks
• If necessary, add recommended coolant to specified level. 6-12 • Check cooling system for leakage. • Check operation. • If soft or spongy, have Yamaha dealer bleed hydraulic system. • Check brake pads for wear. Front brake • Replace if necessary. - Page 31 • Make sure that operation is smooth. • Check throttle grip free play. Throttle grip 6-14, 6-20 • If necessary, have Yamaha dealer adjust throttle grip free play and lubricate ca- ble and grip housing. • Make sure that operation is smooth. Control cables 6-20 •...
-
Page 32: Operation And Important Riding Points
If these warning lights do not go off, have a Yamaha dealer check their electrical circuits. 2. Close the throttle completely. 3. Start the engine by pushing the start switch while applying the front or rear brake. -
Page 33: Starting Off
OPERATION AND IMPORTANT RIDING POINTS attempt. If the engine does not EAU45093 EAU16782 Starting off Acceleration and deceleration start with the starter motor, try us- 1. While pulling the rear brake lever ing the kickstarter. with your left hand and holding the ECA11043 NOTICE grab bar with your right hand,... -
Page 34: Braking
OPERATION AND IMPORTANT RIDING POINTS Front EAU16794 EAU16821 Braking Tips for reducing fuel con- sumption EWA10301 WARNING Fuel consumption depends largely on Avoid braking hard or suddenly your riding style. Consider the follow- (especially when leaning over to ing tips to reduce fuel consumption: one side), otherwise the scooter ... -
Page 35: Engine Break-In
Yamaha dealer Do not park near grass or other check the vehicle. EAU45583 flammable... -
Page 36: Periodic Maintenance And Adjustment
To avoid possible burns, let tivities incorrectly may increase brake components cool before your risk of injury or death during touching them. service or while using the vehicle. If you are not familiar with vehicle ser- vice, have a Yamaha dealer perform service. -
Page 37: Periodic Maintenance Chart For The Emission Control System
From 30000 km (17500 mi), repeat the maintenance intervals starting from 6000 km (3500 mi). Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and tech- nical skills. -
Page 38: General Maintenance And Lubrication Chart
PERIODIC MAINTENANCE AND ADJUSTMENT EAU1771A General maintenance and lubrication chart ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 6000 km 12000 km 18000 km 24000 km CHECK (600 mi) (3500 mi) (7000 mi) (10500 mi) (14000 mi) √ √... - Page 39 PERIODIC MAINTENANCE AND ADJUSTMENT ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 6000 km 12000 km 18000 km 24000 km CHECK (600 mi) (3500 mi) (7000 mi) (10500 mi) (14000 mi) • Check bearing for looseness or √ √...
- Page 40 PERIODIC MAINTENANCE AND ADJUSTMENT ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 6000 km 12000 km 18000 km 24000 km CHECK (600 mi) (3500 mi) (7000 mi) (10500 mi) (14000 mi) √ √ √ • Check vehicle for oil leakage. Final transmission √...
-
Page 41: Removing And Installing The Cowling And Panel
PERIODIC MAINTENANCE AND ADJUSTMENT EAU18743 Removing and installing the cowling and panel The cowling and panel shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time the cowling or panel needs to be re- moved and installed. -
Page 42: Checking The Spark Plug
1. Panel A ating improperly. Do not attempt to diagnose such problems yourself. In- To install the panel stead, have a Yamaha dealer check Place the panel in the original position, the vehicle. 1. Spark plug cap and then install the screw. -
Page 43: Engine Oil And Oil Strainer
PERIODIC MAINTENANCE AND ADJUSTMENT 2. Check the spark plug for electrode 2. Clean the surface of the spark EAUM3170 Engine oil and oil strainer erosion and excessive carbon or plug gasket and its mating sur- The engine oil level should be checked other deposits, and replace it if face, and then wipe off any grime before each ride. - Page 44 PERIODIC MAINTENANCE AND ADJUSTMENT 3. Wait a few minutes until the oil set- tles, remove the oil filler cap, wipe the dipstick clean, insert it back into the oil filler hole (without screwing it in), and then remove it again to check the oil level. The engine oil should be between the minimum and maximum level marks.
- Page 45 PERIODIC MAINTENANCE AND ADJUSTMENT 2. Release the button, and the oil Tightening torque: change indicator will go off. Engine oil drain bolt A: 23 Nm (2.3 m·kgf, 17 ft·lbf) Engine oil drain bolt B: 32 Nm (3.2 m·kgf, 23 ft·lbf) 8.
-
Page 46: Final Transmission Oil
5. Install the final transmission oil ride. If any leakage is found, have a drain bolt, and then tighten it to Yamaha dealer check and repair the the specified torque. scooter. In addition, the final transmis- sion oil must be changed as follows at... -
Page 47: Coolant
If water has been the level varies with engine tem- added to the coolant, have a perature. Yamaha dealer check the anti- Make sure that the vehicle is posi- freeze content of the coolant as tioned straight up when checking soon as possible, otherwise the the coolant level. -
Page 48: Replacing The Air Filter Element And Cleaning The Check Hose
2. Pull the air filter element out. tenance and lubrication chart. Have a 3. Insert a new air filter element into Yamaha dealer change the coolant. the air filter case as shown. WARNING! Never attempt to remove NOTICE: Make sure that the air... -
Page 49: Checking The Throttle Grip Free Play
Therefore, it must be adjusted by a Yamaha dealer is essential to maintain the tires in good at the intervals specified in the periodic condition at all times and replace them maintenance and lubrication chart. - Page 50 WARNING or glass fragments in it, or if the side- for this model. Never overload your vehicle. Opera- wall is cracked, have a Yamaha dealer tion of an overloaded vehicle could replace the tire immediately. cause an accident. Minimum tire tread depth (front and rear): 1.6 mm (0.06 in)
-
Page 51: Cast Wheels
Cast wheels WARNING This model is equipped with tubeless To maximize the performance, durabil- Have a Yamaha dealer replace tires. ity, and safe operation of your vehicle, Tires age, even if they have not been excessively worn tires. Besides... -
Page 52: Checking The Front Brake Lever Free Play
If proper adjustment cannot be ob- The brake lever free play should mea- The brake lever free play should mea- tained as described, have a Yamaha sure 2.0–5.0 mm (0.08–0.20 in) as sure 10.0–20.0 mm (0.39–0.79 in) as dealer make this adjustment. -
Page 53: Checking The Front Brake Pads And Rear Brake Shoes
Check each front brake pad for dam- point that the wear indicator reaches EWA15991 age and measure the lining thickness. the wear limit mark, have a Yamaha WARNING If a brake pad is damaged or if the lin- dealer replace the brake shoes as a Improper maintenance can result in ing thickness is less than 3.1 mm (0.12... -
Page 54: Changing The Brake Fluid
As the brake pads wear, it is normal for EAUM1361 Changing the brake fluid low air to enter the brake sys- the brake fluid level to gradually go Have a Yamaha dealer change the down. A low brake fluid level may indi- tem, reducing braking brake fluid at the intervals specified in performance. -
Page 55: Checking And Lubricating The Cables
Yamaha dealer at the intervals tenance and lubrication chart. cated if necessary. If a cable is specified in the periodic maintenance... -
Page 56: Checking And Lubricating The Centerstand
EWA11302 WARNING If the centerstand does not move up and down smoothly, have a Yamaha dealer check or repair it. Otherwise, the centerstand could contact the ground and distract the operator, re- sulting in a possible loss of control. -
Page 57: Checking The Front Fork
2. Hold the lower ends of the front fork does not operate smoothly, tion. WARNING! To avoid injury, fork legs and try to move them for- have a Yamaha dealer check or re- securely support the vehicle so ward and backward. If any free pair it. -
Page 58: Checking The Wheel Bearings
The elec- hub or if the wheel does not turn trolyte level, battery lead connections smoothly, have a Yamaha dealer and breather hose routing should be check the wheel bearings. checked before each ride and at the in- 1. - Page 59 PERIODIC MAINTENANCE AND ADJUSTMENT KEEP THIS AND ALL BATTER- distilled water, as tap water is turned to “ ”, then connect contains minerals that IES OUT OF THE REACH OF the positive lead before con- harmful to the battery. CHILDREN.
-
Page 60: Replacing The Fuse
4. If the fuse immediately blows ency of the glass, the luminosity The fuse holder is located beside the again, have a Yamaha dealer of the bulb, and the bulb life will battery. Remove panel A to access the check the electrical system. - Page 61 NOTICE position, and then secure it with 4. Remove the headlight bulb cover. the bulb holder. It is advisable to have a Yamaha 7. Install the headlight bulb cover. dealer perform this job. 8. Connect the headlight coupler. 1. Place the scooter on the center- 9.
-
Page 62: Replacing A Front Turn Signal Light Bulb
ECA10671 6. Install the socket (together with NOTICE screws. the bulb) by turning it clockwise. It is advisable to have a Yamaha 7. Install the cowling. dealer perform this job. 1. Place the scooter on the center- stand. 2. Remove cowling A. (See page 6-6.) -
Page 63: License Plate Light
License plate light Replacing the auxiliary light If the license plate light does not come bulb on, have a Yamaha dealer check the If the auxiliary light bulb burns out, re- electrical circuit or replace the bulb. place it as follows. -
Page 64: Troubleshooting
5. Insert a new bulb into the socket. self. However, should your scooter re- 6. Install the socket (together with quire any repair, take it to a Yamaha the bulb) by pushing it in. dealer, whose skilled technicians have 7. Install the cowling. -
Page 65: Troubleshooting Charts
Remove the spark plug and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the compression. 4. Compression The engine does not start. There is compression. - Page 66 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK. If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended cool- ant as soon as possible.
-
Page 67: Scooter Care And Storage
Be Rust and corrosion can develop even if ECA10784 NOTICE sure to consult a Yamaha dealer for high-quality components are used. A rusty exhaust pipe may go unnoticed advice on what products to use be- Avoid using strong acidic wheel on a car, however, it detracts from the fore cleaning the vehicle. - Page 68 For additional hoses and vents. roads during winter are extremely cor- For scooters equipped with a cleaning, use Yamaha Windshield rosive in combination with water, carry windshield: Do not use strong Cleaner or another high-quality wind-...
- Page 69 SCOOTER CARE AND STORAGE windshield which does not affect your EWA10943 WARNING visibility and which cannot be easily Consult a Yamaha dealer for ad- recognized. Contaminants on the brakes or tires vice on what products to use. can cause loss of control.
-
Page 70: Storage
SCOOTER CARE AND STORAGE 2. Fill up the fuel tank and add fuel 4. Lubricate all control cables and EAU36564 Storage stabilizer (if available) to prevent the pivoting points of all levers and the fuel tank from rusting and the pedals as well as of the side- Short-term fuel from deteriorating. -
Page 71: Specifications
SPECIFICATIONS Dimensions: Engine oil: Air filter: Overall length: Type: Air filter element: 1840 mm (72.4 in) SAE 10W-30, 10W-40, 20W-40 or 20W-50 Oil-coated paper element Overall width: Fuel: 10 30 50 70 90 110 130 ˚F 793 mm (31.2 in) Recommended fuel: Overall height: Premium unleaded gasoline (Gasohol (E10) - Page 72 SPECIFICATIONS Chassis: Tire air pressure (measured on cold Operation: Left hand operation Frame type: tires): Front suspension: Underbone Loading condition: Caster angle: Type: 0–90 kg (0–198 lb) 26.50 ° Telescopic fork Front: Trail: Spring/shock absorber type: 175 kPa (1.75 kgf/cm², 25 psi) 92 mm (3.6 in) Coil spring/oil damper Rear:...
- Page 73 SPECIFICATIONS Front turn signal light: 12 V, 10.0 W × 2 Rear turn signal light: 12 V, 10.0 W × 2 Auxiliary light: 12 V, 5.0 W × 1 (CHE) License plate light: 12 V, 5.0 W × 1 (CYP, IRL, CHE) Meter lighting: High beam indicator light: Turn signal indicator light:...
-
Page 74: Consumer Information
Record the vehicle identification num- ber and model label information in the spaces provided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehicle is stolen. VEHICLE IDENTIFICATION NUMBER: 1. Vehicle identification number 1. - Page 75 INDEX Fuel ............3-8 Safety information........1-1 Fuel consumption, tips for reducing ..5-3 Seat............3-11 Acceleration and deceleration....5-2 Fuel level warning light......3-2 Spark plug, checking......6-7 Air filter element and check hose, Fuel tank cap.......... 3-8 Specifications ......... 8-1 replacing and cleaning .......
- Page 78 Original instructions MBK Industrie Z.I. de Rouvroy 02100 Saint Quentin PRINTED IN FRANCE 2013.07 (E)