Vehicle Lights; Replacing A Front Turn Signal Light Bulb - Yamaha 135LC 2022 Owner's Manual

avoid causing extensive dam-
age to the electrical system and
possibly a re.
[EWA15132]
Speci ed fuses:
Main fuse:
15.0 A
Terminal fuse:
5.0 A
Signaling system fuse:
10.0 A
3. Turn the main switch on, and turn
on the electrical circuit in question
to check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
Periodic maintenance and adjustment

Vehicle lights

This model is equipped with LED lights
for headlights, auxiliary lights and
brake/tail light. If a light does not come
on, check the fuse and then have a
Yamaha dealer check the vehicle.
1
2
3
1. Headlight (high beam)
2. Headlight (low beam)
3. Auxiliary light
NOTICE
Do not af x any type of tinted lm or
stickers to the headlight lens.
7-31
EAUN2261
Replacing a front turn signal
light bulb
NOTICE
It is advisable to have a Yamaha
dealer perform this job.
1. Place the vehicle on the center-
stand.
2. Remove panel A and B. (See page
7-8.)
3. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
ECA16581
1
1. Turn signal light bulb socket
4. Remove the burnt out bulb by
pulling it out.
5. Insert a new bulb into the socket.
EAUV0560
ECA10671
7