Removing And Installing The Cowling And Panel - Yamaha Neo's YN50 Owner's Manual

Removing and installing the
cowling and panel
1. Cowling A
2. Panel A
The cowling and panel shown above
need to be removed to perform some
of the maintenance jobs described in
this chapter. Refer to this section
each time a cowling or panel needs to
be removed and installed.
Cowling A
To remove the cowling
1. Remove the screws, and then
pull the cowling off as shown.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU18740
1. Cowling A
2. Screw
2. Disconnect the headlight coupler,
EAU45470
and the auxiliary light lead cou-
pler.
1. Headlight coupler
2. Auxiliary light lead coupler
To install the cowling
1. Connect the headlight coupler,
2. Place the cowling in the original
Panel A
To remove the panel
Remove the screw, and then pull the
panel off as shown.
6-6
and the auxiliary light lead cou-
pler.
position, and then install the
screws.
6
EAU19281