PERIODIC MAINTENANCE AND ADJUSTMENT
Specified fuse:
7.5 A
3. Turn the key to "
6
the electrical circuits to check if
the devices operate.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
Replacing the headlight bulb
If the headlight bulb burns out, repla-
ce it as follows.
NOTICE
Take care not to damage the follo-
wing parts:
G
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it
free from oil, otherwise the
transparency of the glass, the
luminosity of the bulb, and the
bulb life will be adversely affec-
" and turn on
ted. Thoroughly clean off any
dirt and fingerprints on the
headlight bulb using a cloth
moistened with alcohol or thin-
ner.
G
Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
EAUS1402
ECA10650
1. Do not touch the glass part of the bulb
NOTICE
It is advisable to have a Yamaha
dealer perform this job.
1. Place the scooter on the centers-
2. Remove cowling A. (See page
3. Disconnect the headlight coupler.
6-21
tand.
6-6).
ECA10670