Power Connector Cable - HP Pavilion TouchSmart 15 Maintenance And Service Manual

Power connector cable

Description
Power connector cable (includes bracket)
Before removing the power connector cable, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a. Optical drive (see
b. Service door (see
c.
WLAN module (see
d. Memory module (see
e. Keyboard (see
f.
Top cover (see
g.
Hard drive (see
h. System board (see
Remove the power connector board:
NOTE: The power connector bracket was removed when removing the system board.
1. Turn the system board upside down, with the front toward you.
Battery on page 43), and then remove the following components:
Optical drive on page
Service door on page
WLAN module on page
Memory module on page
Keyboard on page 55).
Top cover on page 61).
Hard drive on page 65).
System board on page
48).
45).
47).
45).
75).
Component replacement procedures
Spare part number
732067-001
91