Table of Contents
Advertisement
Speco Technologies
6) Digital Noise Reduction (Dynamic Noise Reduction)
DNR is to reduce the noise on the screen.
① Press the SET button to display the SETUP menu and move the
arrow indicator to 'DNR' using the UP or DOWN button.
② SET 'DNR' to the desired mode using the LEFT or RIGHT button.
▶OFF : Deactivation
▶LOW : Low reduction of the noise
▶MIDDLE : Middle reduction of the noise
▶HIGH : High reduction of the noise
Notes
If you change the 'GAIN' menu from AGC-L to AGC-H
sensitivity is increased as well as noise on the screen.
IP Camera User's Manual
82
Advertisement
Table of Contents
