Table of Contents
Advertisement
Speco Technologies
the port of THE CAMERA, then it will work properly. The port being used by THE CAMERA can be
checked
on 'Port Setting' of 'Network Setting' of 'Administrator's Page'.
Port of THE CAMERA on ex-factory is set default as follows ;
Web Connection Port: Port 80 TCP
Authentication and Control Port: Port 9000 TCP
Video Streaming Port: Port 9001 TCP
Motion Detection Control Port : Port 9005 TCP
In setting user port, do not use 1504, 1508, which port is used in THE CAMERA itself.
IP Camera User's Manual
38
Advertisement
Table of Contents
