Table of Contents
Advertisement
Speco Technologies
Input name of THE CAMERA in ① of [5-12], which will be applied only in Service Server.
② Server Name is to input Domain Name to connect to THE CAMERA. Make this name easy to
remember because you can use it to connect to THE CAMERA by Domain Name in case not knowing IP
address of THE CAMERA. Domain Name must be unique. Register after checking if it is duplicate or not.
③ is to check whether the Camera is to be open or not. ④ is for the function to connect to THE
CAMERA easily by User's ID and Password registered in THE CAMERA, to monitor or control Video of
THE CAMERA on Mobile Phone. (Mobile Phone Users should tick "Enable" and input connection ID and
Password.)
'EMAIL SERVICE' is the function to send the set message to E-mail address set by user upon alarm on
THE CAMERA in case user set the use of alarm server as Enable. (refer to 'Alarm Setting' in '4. Expert
Setting'). It's available to input up to 5 Mail address and input up to 5 messages upon checking on
'ENABLE'.
'SMS SERVICE' is the function to send the set message (SMS) from Service Server to Mobile Phone
number set by user upon alarm on THE CAMERA, in case setting to use Alarm Server as 'ENABLE'.
Fig. 5―13 Camera Registration
100
IP Camera User's Manual
Advertisement
Table of Contents
