Table of Contents
Advertisement
Speco Technologies
14)
Remove LAN Cable (Cross Cable) connected between THE CAMERA and PC.
15)
Connect THE CAMERA to Network with LAN Cable (Straight Cable).
16)
Connect PC to Network with LAN Cable (Straight Cable)..
17)
Set up IP Address, Subnet Mask and Gateway of PC according to the Network
environment.
18)
Check
Run Web Browser on PC, input IP address set in THE CAMERA onto URL and
Pic 3―5 IP Change
Fig. 3―6 IP Change loading Page
30
IP Camera User's Manual
Advertisement
Table of Contents
