LG LNB5100 series Owner's Manual page 21

OPTION INDOOR
Max Shutter
Shutter speed AUTO
AGC MIDDLE
White Balance Manual (Indoor)
WDR/BLC Unused
3D-DNR MIDDLE
DAY/NIGHT AUTO
ACE Unused
SHARPNESS
BRIGHTNESS
SENS-UP
EXPOSURE
• Value of [SCENE MODE] is not initialized even the reboot
system. If you set to [STD], the default value of [SCENE
MODE], run factory reset.
• If you use not DC Iris lens but Manual Iris lens, must set
ELC mode on the [EXPOSURE] option. In this case, value
of [SCENE MODE] set to [USER] automatically.
• When the [maximum shutter speed] value is maximum,
If you set the [Capture Mode] to 30fps and 25fps the
shutter speed will be 1/30sec and 1/25sec.
> 3D-DNR: If pictures are not clear due to noise, this option
would reduce the noise of picture. When you use this
function, the afterimage may occur.
> D-Effect: You can select the digital effect.
- MIRROR: Turn on the mirror effect.
- ROTATE: Rotate the picture. (180°)
- V-FLIP: Flip the picture vertically.
Operation and settings
TRAFFIC
MAX -
Manual (1/120)
HIGH
ATW
Unused
MIDDLE
AUTO
Unused
34 34
50 50
OFF OFF
ALC ALC
- OFF: Turn off the digital effect.
USER
> D-ZOOM: Select [ON] to set the digital zoom level.
-
-
- ZOOM: You can enlarge the screen.
-
- PAN: You can move the screen. (left or right)
-
- TILT: You can move the screen. (up or down)
-
> Color: You can switch the displayed picture to gray scale or
- color.
-
- On: To display the picture with color. If you set [On], the
-
[Color Level] option is activated. Adjust the [Color Level]
- value using by jog controller or enter the desired value.
-
- Off: To display the picture with grayscale.
-
> Sharpness: The degree to which the boundary of the two
-
portions is clearly distinguished. Adjust the value using
by jog controller enter the desired value. If you set the
sharpness value to higher, the image outline becomes sharp.
If you set to lower value, the image outline becomes dim.
> Stabilizer: The image stabilizer function minimizes the
appearance of shaky images caused by low-frequency
vibration. This function is useful for outdoor surveillance.
Select the [Stabilizer] option and set to [On] or [Off ].
> Camera Version: Displays the software version on the
monitor.
• Factory Reset: Clear certain settings and information and return
to factory default settings.
• Reboot: Reboot the camera system.
21