LG LNB5100 series Owner's Manual page 34

Intelligent Motion Detection
Detect the motion of object where you set the zone.
> Zone: Set the zone.
- Add
1. Click the [Add] button. When you click on the
preview screen, yellow cross point is displayed.
2. Click again to make another point. The point is
connected as sky blue line from previous point.
34
3. To complete the zone, move the mouse cursor from
the selected points and click the mouse right button.
Notes:
• When you select all of point, you can set up to 15
points and area is set automatically.
• You can cancel the point by click the mouse right
button near the other point.
• If the path is intersected each other, area setting can
not complete.
• Up to 4 Zone is available to set.
- Delete: Delete the selected zone.
- Delete All: Delete all of the motion area.
> Basic Configuration
- Sensitivity: Select the sensitivity from drop-down list to
detect an object in motion.
- Object Size
1. Click the check box of the [Modify] option.
2. The rectangular zone of the maximum and the
minimum object size are displayed.
3. Drag the point of the rectangular zone to adjust the
size.
Notes:
• When you click [Modify], value of maximum and
minimum object size is initialized.
• Width and Height of zone are displayed as
percentage of the screen automatically.
• Maximum value is more than minimum value.
• Save: Click this button to confirm the settings.
Operation and settings