LG LNB5100 series Owner's Manual page 22

Stream
Resolution
> HD: Displays the maximum image size of the camera.
> SD: Select the output image size of the camera.
Note:
When you use the Smart Analytics function, SD resolution is
changed as shown below.
Smart Analytics
Off
On
Profile
> Enable: Click to activate the stream function.
> Video codec: Select the video mode (Codec) from the drop-
down list. The viewer can choose among MJPEG, H.264 and
H.264_HIGH.
> Maximum frame rate: Set the frame rate of the image.
> GOP size: It means "Group of Pictures". The higher the GOP,
the better is the video quality of the camera. Edit the value
of GOP from 1 to 30. This setting is valid for H.264 video
format only.
22
D1 CIF
704 x 480 352 x 240
640 x 384 320 x 192
> Quality: Select the Quality.
- VBR: The bit rate may vary depending on the complexity
of the video to meet the selected quality.
- CBR: The video quality may vary in order to preserve a
constant bit rate.
> Stream quality: If the [Quality] option set to VBR, this option
is displayed. Select the stream quality from the drop down
box, the camera supports five types. (Highest, High, Medium,
Low and Lowest)
> Alias: Enter the profile name you want to use.
> Bit rate: If the [Quality] option set to CBR, this option is
displayed. Edit the bit rate value from 256 kbps to 10 240
kbps.
Note:
If the 'Bit rate' is configured too low with high resolution,
the actual frame rate will decrease because of narrow
bandwidth. So you need to set or change the 'Bit rate' to
high value.
• Save: Click this button to confirm the settings.
Operation and settings