Trip Zone
Detect the direction of object by dividing two of zone.
> Zone: Set the zone.
-
Split:
1. Click the [Set1] button. When you click on the
preview screen, yellow cross point is displayed.
36
2. Click again to make another point and the point is
connected as sky blue line from previous point.
3. Click the mouse right button to complete the zone.
Notes:
•
You can cancel the point by click the mouse right
button near the other point.
•
If the path is intersected each other, area setting
can not complete.
4. Click [Set2] and select side of the previous zone.
5. Repeat the steps 1 to 3 to add other positions.
6. Click [Delete All] to clear all of the area.
-
Directionality: Select the movement direction of object.
Notes:
•
When you select all of point, you can set up to 15
points and area is set automatically.
•
You can cancel the point by click the mouse right
button near the other point.
•
If the path is intersected each other, area setting can
not complete.
> Basic Configuration
-
Sensitivity: Select the sensitivity from drop-down list to
detect an object in motion.
-
Object Size
1. Click the check box of the [Modify] option.
2. The rectangular zone of the maximum and the
minimum object size are displayed.
3. Drag the point of the rectangular zone to adjust the
size.
Operation and settings