Juniper WLA620 Installation Manual page 73

Table 2 lists the mechanical and compliance specifications for the WLA632.
Table 2: WLA632 Mechanical and Compliance Specifications
Specification
Maximum Channels
(Outdoor)
Data Rates
Modulation Types
Operating Frequency
Power Injector
Weight
Temperature
Humidity OK
Copyright © 2012, Juniper Networks, Inc.
Description
Each WLA632 will operate with a single base MAC Address, and will consume 64
sequential MAC Addresses after the base MAC address for a total of 32 addresses
allocated per radio
802.11b/g/n Channel:
1 CH ~ 11 CH (FCC)
1 CH ~ 13 CH (ETSI)
1 CH ~ 14 CHs (Japan) Channel 14 required for 11b
802.11a/n Channel:
FCC (20 channels): 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149,
153, 157, 161, 165 (except for Hong Kong where 36-48 outdoor is allowed).
For indoor application only: channels 36-48.
EU (11 channels): 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140. For indoor application
only: channels 36-48, 52-64+.
Japan (8 channels):
802.11a: OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
802.11b/g:
DSSS (DBPSK, DQPSK, CCK)
OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
802.11n:
DSSS (DBPSK, DQPSK, CCK)
OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
Radio 1 supports:
2.4 GHz to 2.4835 GHz: Channels 1 to 14.
Radio 2 supports:
5.15 GHz to 5.35 GHz: Channels 52 to 64 (36 to 48 for Hong Kong only as well as indoor
application)
5.47 GHz to 5.725 GHz: Channels 100 to 140
5.75 to 5.85 GHz: Channels 149 to 165
Input: 48Vdc
without bracket: 4.4 kgs (9.8 lbs)

with wall mount bracket: 5.08 kgs (11.2 lbs)

with bracket needed for small pole mount: kgs 5.4 (12 lbs)

with bracket and straps for large pole mount: 5.2 kgs (11.5 lbs)

Operating: -40 to 55°C (-40 to 131°F)
Storage: -40 to 70 °C (-40 to 158 °F)
Each WLA632 will operate with a single base MAC Address, and will consume 64
sequential MAC Addresses after the base MAC address for a total of 32 addresses
allocated per radio
WLA Series Technical Specifications
3