Table of Contents
Advertisement
Mounting on Larger Diameter Poles
There is also a method for attaching the pole-mounting bracket to a pole that is 5.08 to
12.7 cm
(2 to 5 inches) in diameter using an adjustable steel band strap (not included in the kit).
A steel band strap up to 1.27 cm (0.5 inch) wide can be threaded through the main part
of the bracket to secure it to a larger diameter pole without using the U-shaped part of
the bracket. This method is illustrated in the following figure.
Figure 3–11. Attaching the Bracket Using a Steel Band strap
Using the Wall-Mounting Bracket
Perform the following steps to mount the unit to a wall using the wall-mounting bracket.
Informational Note:
of the wireless bridge to be aligned. It is intended for use with the unit using an external
antenna.
1. Always attach the bracket to a wall with the flat side flush against the wall (see
following figure).
Figure 3–12. Wall-Mounting Bracket
Copyright © 2012, Juniper Networks, Inc.
The wall-mounting bracket does not allow the integrated antenna
Installing and Connecting an Access Point
15
Advertisement
Table of Contents
