2. Connect the Camera to the Network
Next, connect the camera. Connect the camera to the network by connecting the camera and PC
via the hub with a LAN cable .
* Do not plug the AC cable power
plug into the wall socket yet.
AC cable
Turning the Power ON and OFF
The VB-C50Fi itself does not have a power switch. You can switch the VB-C50Fi on by plugging
the AC adapter into a wall outlet. The LED flashes when the VB-C50Fi is communicating. When
the power supply is turned ON, the LED momentarily flashes.
● Wait at least 5 seconds before turning the power back on after shutting it off. Turning
it on too quickly may result in a malfunction. Observe the precautions given in "a
Note
Safe Use of Equipment/a IMPORTANT SAFETY INSTRUCTIONS" (→ P.xii).
● If the picture recording function is being used, shutting off the power or
restarting the VB-C50Fi will cause all pictures to be deleted.
2-6
(Rear of main unit)
AC adapter
to AC outlet
AC adapter
AC cable
Hub
LAN cable
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
The network connection is now complete.
PC
Main unit