Setup Workflow
The flow for setting up and checking the camera's images involves performing various settings
after the device is set up and your PC and the network are connected via the hub. Then, check to
see if you can display images from the camera.
1
Set up the camera
Set up the device.
Make sure the device is set up properly (→ P.2-4).
VB-C50Fi
Hub
3
Perform initial settings for the camera
Insert the CD-ROM provided into your
PC and perform initial settings following
instructions on the screen (→ P.2-7).
2-2
2
Connect the camera to the network
Connect the camera and your PC via the hub (→ P.2-6).
LAN cable
Ver. 1.0 J/E
D70-0066-01
Supplied CD-ROM