Connect The Camera To The Network; Turning The Power On And Off - Canon VB-C50i/VB-C50iR User Manual

2. Connect the Camera to the Network

Next, connect the camera. Connect the camera to the network by connecting the camera and PC
via the hub with a LAN cable .
* Do not plug the AC cable power
plug into the wall socket yet.
AC cable

Turning the Power ON and OFF

The VB-C50i/VB-C50iR itself does not have a power switch. You can switch the VB-C50i/VB-
C50iR on by plugging the AC adapter into a wall outlet. The LED flashes when the VB-C50i/VB-
C50iR is communicating. When the power supply is turned ON, the LED momentarily flashes.
● The camera head position is automatically initialized when the power supply is
turned ON from OFF.
Note
● Never touch the camera head during initialization as this could prevent
successful initialization and cause faults.
● Wait at least 5 seconds before turning the power back on after shutting it off. Turning
it on too quickly may result in a malfunction. Observe the precautions given in "a
Safe Use of Equipment/a IMPORTANT SAFETY INSTRUCTIONS" (→ P.xii).
● If the picture and audio recording* function is being used, shutting off the
power or restarting the VB-C50i/VB-C50iR will delete all the pictures and audio*.
*
Only available with two particular models (→ P.iii)
2-6
AC adapter
to AC outlet
AC adapter
AC cable
The network connection is now complete.
(Rear of main unit)
Hub
LAN cable
Main unit
PC