Canon VB-C50Fi User Manual page 180

Using VBCollector
r "Apply" button
Saves a change to the reception port number in the registry. If you make a change, a dialog
box is displayed. Click "Yes" and the transmission port of each server is also changed.
t "Server Setting" button
Displays a dialog box with information about the selected server for editing (→ P.6-11).
y "Notification Settings" button
For performing notification settings for the selected server.
3. Click the "Notification Settings" button to set a value for available space for
the server to give a low server capacity notification.
q "Send notification when server space gets low"
Select to send a low server capacity notification
when available space on the server is insufficient.
w "Available disk space of the server"
Set a value for available space at which the server
will send a low server capacity notification.
When available space on the server falls below the
value set, a low server capacity notification is sent.
* For Windows XP SP2 users, see "Using the VB-
C50Fi with Windows XP SP2" (→ P.1-5).
● Where "Host" is displayed as "(Other)" or where the transmission port and the
reception port are different, you cannot receive a low server capacity notification.
Tip
● "--------" is displayed where server information such as the host name or the HTTP
port number has not been entered correctly, or in the case of servers other than
the VB-C50Fi which support the low server capacity notification function.
● If "Host" is not "(Other)" or "Port" is not "Reception Port No." in the selected server,
a message asking you to confirm whether it is okay to change the setting values
will be displayed. Click the "Yes" button and a dialog box appears.
● If the server that sends the notification is in the middle of a task, there is no automatic
downloading during normal tasks.
● If there is a setting value for the maximum number of downloaded images, only the
specified number will be downloaded.
● Images on the server are deleted regardless of the setting for deletion of the images
on the server.
● When large images are recorded each second, the server will run out of capacity
before it can send a notification, and picture recording may stop working.
● When the server capacity falls below the set value, a notification will be sent from
the server every 30 seconds.
6-20
q
w