Connect The Camera To A Pc - Canon VB-H45 Work Support Manual

(2) Connect the Camera to a PC

1
Use LAN cables to connect the Windows PC and the network camera to the PoE
hub. Connect the network camera to the power supply port on the PoE hub.
* Do not connect any devices other than the camera and the Windows PC.
Otherwise, the identical IP addresses might be used.
Camera unit
2
Turn ON the power to the Windows PC and the PoE hub. (It is ok if they are already ON.)
Wait about 30 seconds for the camera to finish starting up. (When the network
camera's LED comes on and the camera moves slightly in the pan and tilt directions,
the startup process is complete.)
PoE hub
PoE PoE
Non-PoE
Windows PC
Non-PoE
LED
1
8