Related Manuals for Crestron BB-4L
Summary of Contents for Crestron BB-4L
- Page 1 Crestron BB-4L Crestron BB-4L Wall Mount Back Box Wall Mount Back Box Installation Guide Installation Guide...
-
Page 2: Table Of Contents
Crestron BB-4L Wall Mount Back Box Contents Wall Mount Back Box: BB-4L Description..........................1 Setup ............................4 Assembly ........................4 Mounting ........................4 Installation ........................6 Other Mounting Option Accessories ................7 Resources........................... 8 Industry Compliance ....................8 Reference Documents....................8 Further Inquiries ...................... -
Page 3: Wall Mount Back Box: Bb-4L
-listed pre-construction mounting option for the Crestron Isys TPS-4L wall mounted touchpanel. It is designed to be installed before the drywall is put up. The table below lists all parts included with the BB-4L. NOTE: If mounting into a material other than drywall (for example, wood lectern, concrete, or rock) use the cutout template, available in the post-construction kit WMKM-4L or WMKT-4L. - Page 4 Wall Mount Back Box Crestron BB-4L The dimensions of the BB-4L are shown below and on the next page. Dimensional Drawing (Fully Assembled without Cover Plate) 8.47 in (21.52 cm) 5.00 in (12.70 cm) 5.61 in (14.25 cm) 3.90 in (9.91 cm)
- Page 5 Crestron BB-4L Wall Mount Back Box Dimensional Drawing - Cover Plate 6.00 in (15.24 cm) 4.50 in (11.43 cm) 0.03 in (0.08 cm) Wall Mount Back Box: BB-4L • 3 Installation Guide - DOC. 6387B...
-
Page 6: Setup
4. Feed cables through knockout holes. NOTE: This assembly should use Class 2 wiring only. 4 • Wall Mount Back Box: BB-4L Installation Guide - DOC. 6387B... - Page 7 ARE FLUSH COVER PLATE (2013239) TO COVER CUTOUT IN DRYWALL BEFORE TOUCHPANEL IS INSTALLED SCREWS (4) #04-40 x 2" (MAY BE REQUIRED BY LOCAL PAN HEAD (2018793) BUILDING CODES) Wall Mount Back Box: BB-4L • 5 Installation Guide - DOC. 6387B...
-
Page 8: Installation
#04-40 x 2” screws. If the touchpanel is to be installed, refer to the latest revision of the TPS-4L Installation and Operations Guide (Doc. 6449) for installation instructions. The document is available from the Crestron website (http://www.crestron.com/manuals). Refer also to the following comprehensive illustration. -
Page 9: Other Mounting Option Accessories
This option provides a finished appearance and is preferred when wallpaper is hung. The manuals for the MMK-4L and TMK-4L are available from the Crestron website. Wall Mount Back Box: BB-4L • 7 Installation Guide - DOC. 6387B... -
Page 10: Resources
This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc. (E227280) As of the date of manufacture, the BB-4L has been tested and found to comply with specifications for CE marking marking and standards per EMC and Radiocommunications Compliance Labelling. -
Page 11: Return And Warranty Policies
Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended or if it has been subjected to misuse, accidental damage, modification or improper installation procedures. - Page 12 Crestron Electronics, Inc. Installation Guide – DOC. 6387B 15 Volvo Drive Rockleigh, NJ 07647 (2019474) Tel: 888.CRESTRON 11.07 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.