Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Crestron BB-4L
Summary of Contents for Crestron BB-4L
- Page 1 Crestron BB-4L Wall Mount Back Box Installation Guide...
- Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2005 Crestron Electronics, Inc.
-
Page 3: Table Of Contents
Crestron BB-4L Contents Wall Mount Back Box: BB-4L Description... 1 Installation ... 3 Assembly ... 3 Mounting ... 4 Other Mounting Option Accessories ... 5 Further Inquiries ... 5 Future Updates... 6 Return and Warranty Policies ... 7 Merchandise Returns / Repair Service ... 7 CRESTRON Limited Warranty... -
Page 5: Wall Mount Back Box: Bb-4L
TPS-4L and TPMC-4L wall mounted touchpanels. The table below lists all parts included with the BB-4L. Supplied Components The mounted view of the BB-4L is shown in the following diagram. BB-4L Mounted View (Optional Cover Plate Attached) Installation Guide - DOC. 6387 ®... - Page 6 Wall Mount Back Box The dimensions of the BB-4L are shown in the following diagram. Dimensional Drawing (Fully Assembled without Cover Plate) 8.27 in (21.01 cm) 4.50 in (11.43 cm) 2 • Wall Mount Back Box: BB-4L 6.93 in (17.60 cm) 5.00 in...
-
Page 7: Installation
Complete the following assembly procedure in the order provided (refer to illustration below). NOTE: #08-8B self-tapping screw (2007277), supplied for grounding purposes, is installed in the rear of the back box mounting enclosure assembly. It cannot be seen in the following assembly view. Assembly View Installation Guide - DOC. -
Page 8: Mounting
• Level • 1. Position the back box at the front edge of the stud and align it as even and as flush as possible. 2. Use the level and verify that the back box is horizontal. Leveling must be done before proceeding. -
Page 9: Other Mounting Option Accessories
This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc. As of the date of manufacture, the BB-4L has been tested and found to comply with specifications for CE marking. Installation Guide - DOC. 6387 5. -
Page 10: Future Updates
Wall Mount Back Box Future Updates As Crestron adds improvements to the BB-4L, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision. -
Page 11: Return And Warranty Policies
Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. - Page 12 Crestron Electronics, Inc. Installation Guide – DOC. 6387 15 Volvo Drive Rockleigh, NJ 07647 (2013259) Tel: 888.CRESTRON 12.05 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.