Replacing The Front And Back Sensor Rollers - Bell and Howell Sidekick 1200 Operator's Manual

Replacing the Front and Back Sensor Rollers

1
Turn the power off.
3
Remove the current Front and Back Sensor Rollers.
•
Using your finger, roll up the right side of
the Sensor Roller (Front) and remove it.
Sensor Roller (Front)
2
Push the ADF door release to open the ADF door.
•
While pushing the wire springs of both
sides, lift the Sensor Roller (Back) and
remove it.
46
Sensor Roller (Back)
Wire spring