Using The Ir Remote Control; Figure 1-4 Ir Remote Control - Honeywell HRG4 User Manual

Position Button/Indicator
0/A
5 SHIFT
6 Control Buttons

Using the IR Remote Control

Your HRG DVR may also be controlled with the IR remote control. Batteries (2 x AAA) must be
installed before operation.
Function
Enter number "0"; Switch between input methods (upper and lowercase alphabet,
symbols and numeric input).
Switches the compound keys functions from inputting the numeric/letter values to
the functional controls.
Directional buttons: In menu mode, the direction buttons are used to navigate
between different fields and items and select setting parameters. In playback mode,
the Up and Down buttons are used to speed up and slow down record play, and the
Left and Right buttons are used to select the recording 30s forwards or backwards.
In Live View mode, these buttons can be used to cycle through channels.
Enter: The Enter button is used to confirm a selection in the Menu mode; or used
to select check box fields and the ON/OFF switch. In playback mode, it can be used
to play or pause the video. In single-frame play mode, pressing the Enter button
advances the video by a single frame. And in auto sequence live view mode, the
buttons can be used to pause / resume auto sequence.
Figure 1-4 IR Remote Control
Table 1-2
# Button
1 POWER
2 DEV
3 Alphanumerics
4 EDIT
5 A
6 REC
7 PLAY
8 INFO
9 VOIP
10 MENU
11 PREV
12 DIRECTION/ENTER
13 PTZ
14 ESC
15 RESERVED
16 F1
17 PTZ CONTROL Buttons
18 F2
See HRG4 Front Panel on page 27
page 28
IR Remote Control
for more about front panel controls.
Introduction | 29
Function
Turn On/Off the HRG DVR.
Enable/Disable Remote Control
Same as front panel
Same as JKL/EDIT on front panel.
Same as 0/A on front panel.
Same as 7/PQRS/REC on front panel.
Same as 6/MNO/PLAY on front panel.
Reserved.
Same as 2/ABC/F1 on front panel.
Same as 1/MENU on front panel.
Same as 9/WXYZ/PREV on front panel.
Same as on front panel.
Same as 8/TUV/PTZ on front panel.
Same as ESC on front panel.
Reserved.
Same as 2/ABC on front panel.
Use to adjust the iris, focus, and zoom.
The F2 button is used to cycle through tab
pages. It can also be used to enter the
Channel and OSD Position settings.
and HRG8 and HRG16 Front Panel on
800-12005V1 - A - 08/2012