Figure 7-2 Advanced Camera Settings - Motion Detection; Figure 7-3 Motion Detection Area Settings Interface - Honeywell HRG4 User Manual

70 | Performance Series DVR User Guide
3.
4.
5.
www.honeywellvideo.com
Figure 7-2 Advanced Camera Settings - Motion Detection
Select the Motion Detection check box, and then click Area Settings to enter the Motion
Detection Area Settings interface.
Mask the Motion Detection area by dragging the grid with your mouse (see
The maximum area can be set to full screen. You can also use the EDIT and direction
buttons on the front panel of the HRG DVR to configure the Motion Detection area.
Figure 7-3 Motion Detection Area Settings Interface
Right-click anywhere in the window or press MENU on the front panel of the DVR to set the
Motion Detection Sensitivity (see
sensitivity level.
Figure 7-4). The higher the value, the higher the
Figure 7-3).