Exception Settings; Figure 7-21 Handle Settings - Honeywell HRG4 User Manual

80 | Performance Series DVR User Guide
8.
9.

Exception Settings

The exception setting allows the DVR to alert you when irregular events occur. These events
include:
•
•
•
•
•
•
To set exceptions:
1.
2.
3.
www.honeywellvideo.com
Figure 7-21 Handle Settings
Click OK to save the settings.
Repeat step 3 to step 8 to configure settings for other channels.
HDD Full: All installed hard drives are full.
HDD Error: Errors occurred during writing of the hard drive(s), no hard drive is installed, or
the hard drive(s) failed to initialize.
Network Disconnected: Disconnected network cable.
IP Conflict: Conflict in IP address setting.
Illegal Login: Incorrect user ID or password used.
Video Output Standard Mismatch: Video output standards do not match each other.
 
Click Menu Settings
Under Exception Type, select the exception that you want to configure.
Select triggering options (see
Exception to enter the Exception menu.
Figure 7-22).