Figure 7-10 Alarm Input Handle Menu; Figure 7-11 Alarm Output Interface - Honeywell HRG4 User Manual

74 | Performance Series DVR User Guide
5.
6.
7.
8.
Alarm outputs can also be configured in the Alarm Settings menu.
To set up an Alarm Output:
1.
2.
www.honeywellvideo.com
Figure 7-10 Alarm Input Handle Menu
Select the Triggered Camera tab.
Select cameras to trigger for recording when an alarm occurs by selecting the check
boxes under the desired cameras (see
You can select a PTZ camera to link with the alarm input and then set the call up of preset,
patrol, and pattern for alarm-linked actions.
Click OK to save the settings.
You can now add a schedule to start recording when an alarm is triggered (see
Scheduling Recording on page
Select the Alarm Output tab to enter the Alarm Output interface (see
Figure 7-11 Alarm Output Interface
Select the output you want to configure, and then click Set to enter the settings page for
the selected channel (see
Figure 7-10).
41).
Figure 7-12).
Figure 7-11).