Changing Settings Using A Web Browser (Web Control); Displaying Web Control; Projector Setup - Epson EasyMP EMP-1715 Operation Manual

Changing Settings Using a Web Browser (Web Control)

You can set up and control the projector from a computer by using the
Web browser of a computer that is connected to the projector via a
network. Setup and control operations can be performed remotely if
this function is used. In addition, since you can use the computers
keyboard, entering characters required for the setup is easier than
using the remote control.
Use Microsoft Internet Explorer 6.0 or later as the Web browser.If
using a Macintosh, you can also use Safari. However,
if using Safari under Macintosh 10.2.8, some of the Web control radio
buttons may not display properly.
Setup and control are possible using a Web browser if
q
"Standby Mode" is set to "Network ON" in the "Extended"
menu of the projector's configuration menu, even if the
projector is in standby mode (when the power is off).

Displaying Web Control

Display Web control the following procedure.
If the Web browser you are using is set up to connect via a
q
proxy server, Web control cannot be displayed. To use Web
control, you need to make network connection settings with
other than a proxy server.
Entering the IP address of the projector
f
Web control can be opened by specifying the IP address of the projector
as follows when connecting using the optional Ethernet unit or when
using Advanced Connection Mode of wireless LAN.
Procedure
A
Start the Web browser on the computer.
B
Enter the IP address of the projector in the address
input box of the Web browser, and press the [Enter]
key on the computer's keyboard.
Web Control is displayed.

Projector Setup

You can set the projector's configuration menu setting items. The contents
set are reflected in the configuration menu.
Configuration menu items that cannot be set by the web
f
browser
All configuration menu items can be set with the exception of the
following items.
• "Settings" - "Pointer Shape", "EasyMP Audio Out"
• Registering a user's logo using "Extended" - "User's Logo"
• "Extended" - "Operation" - "High Altitude Mode"
• "Extended" - "Link21L", "Language"
• "Reset" - "Reset All", "Reset Lamp Hours"
The items available on each menu are the same as the configuration menu
of the projector.
sUser's Guide "Configuration Menu" "List of Functions"
s"Network Settings Function List"
The "MAC Address" is not displayed.
p.25
47