Notes When Using A Wireless Lan; Conditions For Connecting To Compatible Wireless Lan Cards And Access Points; Supplied Wireless Lan Unit Specifications; Electromagnetic Wave Safety Precautions - Epson EasyMP EMP-1715 Operation Manual

Notes When Using a Wireless LAN

Conditions for Connecting to Compatible Wireless
LAN Cards and Access Points
The supplied wireless LAN unit can be connected to the following
products in accordance with IEEE 802.11g, 802.11b, and 802.11a.
• Wireless LAN card
• Computers with internal wireless LAN functionality
• Access points
However, you are unlikely to be able to make an ad hoc connection for
wireless LAN equipment used with a computer in IEEE 802.11g. For
details on wireless LAN equipment see the specifications.

Supplied Wireless LAN Unit Specifications

Frequency Range 2.4 GHz band, 5GHz band.
Modulation 802.11b
802.11a/g : OFDM
Potential Interference Less than 20 m
Range
Propriety of frequency Can use all bands, and can avoid "licensed" and
change "unlicensed" bands.

Electromagnetic Wave Safety Precautions

Be aware of the following points when using the supplied wireless LAN
unit.
• May exert electromagnetic interference on, and cause malfunction of,
cardiac pacemakers. Before use, ensure that electromagnetic interference
does not occur.
• May exert electromagnetic interference on, and cause malfunction of,
sensitive medical equipment. Before use, ensure that electromagnetic
interference does not occur.
: DS-SS
• Do not use near microwave ovens. Wireless communication may be
interrupted by electromagnetic interference generated by microwave
ovens.
• Use of this product on aircraft may be restricted in some countries. Use
of this product is based on due diligence with regard to regulations.

Frequency Precautions

The frequency band for the wireless LAN card that is included with the
projector is 2.4 GHz. This band is also used for industrial, scientific, and
medical devices such as microwave ovens and mobile unit identification
(RF-ID) systems (licenced premises radio stations and unlicenced
specified low-power radio stations) used in factory production lines.
Before using the wireless LAN card, check that there are not any radio
stations for mobile unit identification or specified low-power radio station
premises nearby. In the event that this wireless LAN card should interfere
electromagnetically with the premises of a radio station used for mobile
unit recognition, cease use immediately and stop generating the
electromagnetic field. Contact your nearest dealer or the address provided
under "International Warranty Conditions" in Safety Instructions/World-
Wide Warranty Terms booklet if this wireless LAN card interferes
electromagnetically with a special low-power radio station used for
mobile unit identification or causes similar problems.

International Travel Precautions

Wireless LAN units are based on the specifications of the country of
purchase.
Because wireless LAN units are designed to conform to the channel and
frequency limits of the country they are intended to be used in, the
included wireless LAN unit may infringe upon the laws or regulations of
other countries if used outside the country of purchase.
6