Using the Toolbar
Selecting the Projector to Operate
You can select which projector to operate when connected to multiple
projectors.
Procedure
A
Click the
("Select target projector") button.
The Select target projector screen is displayed.
B
Select the check box for the projector you want to
operate.
Selecting the projector to be operated.
C
Click the "
" in the top right of the screen to close
the Select target projector screen.
The screen number allocated for Multi-
display is shown.
Stopping, Pausing, and resuming Projection
You can stop, pause, and resume projection of computer images when
connected to the projector.
Procedure
A
Select the projector you want to operate. s
B
Click one of the following.
"Stop" button: Stops projecting the computer image. The
Image.jpg picture is projected.
"Show" button: Starts projecting the computer image.
"Pause" button: Pauses projection of the computer image. The
image at the point it was paused is projected. When it is paused,
click the
"Pause" button again to release pause.
11
p.11