Basic Call Functions; Outgoing Calls; Call Devices; Call Methods - RCA IP110 Operation Manual

Basic Call Functions

Outgoing calls

Call Devices

You can make a phone call via the following devices:
Pick up the handset, icon will be shown on the screen.
Press the SPEAKER button, and this icon will be shown on the screen.
Press HEADSET button if a headset is connected to the headset Port.
This icon will be shown on the screen. Pressing the HEADSET button again
will hang up the headset.
Note: You can dial the number first, and then choose the device you will use for your
call.

Call Methods

There are several ways to initiate a call:
1. Press an available Line button and dial the number you want to call, or
2. Dial a number and press the SPEAKER button, the HEADSET button or pick up
the handset, or
3. Go to Directory, use the navigation keys to select the desired contact, or
4. Press the LEFT navigation key to enter the call log interface, then use the navi-
gation keys to make your selection (press LEFT/RIGHT button to choose All Calls,
Dialed Calls, Received Calls, Missed Calls and Forwarded Calls) or
5. Press the UP navigation key to enter the Dialed Calls interface, then choose a
record to dial out or
6. Press and hold a key on the dial pad that has been set as speed dial key.
To terminate a call you can:
1. Press the MENU/BACK key or
2. If you are in handset mode, replace the handset on hook or
3. If you are in speakerphone mode, press the speaker key
23