Table of Contents
Advertisement
Call Park
Call Park is a feature that allows a person to put a call on hold at one telephone
set and continue the conversation from any other telephone set. Your server needs
to support this feature. Please check with your service provider or IP PBX vendor
for more details.
The "call park" feature is activated by pressing a preprogrammed button or a spe-
cial sequence of buttons.
To assign the key as Call Park via web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Voice Mail
When the key is configured as a voicemail key you can access voicemail quickly by
pressing this key.
To assign the key to Voice Mail via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Prefix
When you press a key in which prefix function has been set up, the phone will
automatically dial the prefix and you will only have to dial the rest of your cor-
respondent number to call him out. Prefix can only be assigned to the line keys.
To assign the key as Prefix via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Redial
If a key is configured as Redial key:
• If you press this key in idle status, it will enter the Dialed Calls
interface
• If you press this key in off hoOK mode, last dialed number will be
sent directly
• If you press this key when there is an active call, it will be put on
hold and a new call sent to the last dialed number
To assign Redial to a key via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
43
42
Advertisement
Table of Contents
