Table of Contents
Advertisement
Maintenance Tasks
User levels
The phone allows three modes to configure the phone:
- User Mode
- VAR mode
- Administrator Mode
Administrator mode grants unlimited access to the phone configuration on both
Web and Phone interface. User Mode is not able to access the settings on the
Phone interface such as: Accounts, Network, Reset to Factory, other advance
phone settings. VAR mode grants access to subset of Administrator functions
(Login and password are var/var).
Administrator Mode
Administrator mode grants unlimited access to the phone configuration on both
the web and the phone user interface. The administrator/user password is used to
access:
• Web interface.
• The advanced settings of the phone, such as Network, Account
and Reset to Factory settings via the phone interface.
The default administrator password for the phone interface is admin. The user
name for the web interface access is admin and the password is admin.
To change the administrator password via Phone interface:
1) Make sure active User Type is admin
2) Press MENU/BACK[3. SETTINGs[2. Advanced
3) You are prompted to enter the required password.
4) Scroll to Set Password option, then press OK button.
5) You are prompted to enter the Current PWD, New PWD and Confirm PWD, Press
DIR/TOGGLE to change the input method.
6) Press OK button to confirm the change, or MENU to return to previous menu.
To change the administrator password via Web interface:
Go to SECURITY[PASSWORD
15
Advertisement
Table of Contents
