Table of Contents
Advertisement
General Settings
Phone status
Enter "Status" menu. Select item "SIP Account Status" to view the associated SIP accounts status
(registered/disabled). Select item "Network Status" to view the base network information. This includes
base network type, IP Address, subnet mask, default gateway and DNS.
Time and date
Enter "Settings" menu, Select item "Date & Time". To enter manually, select "Manual Setting". Enter the
date and time and then press "Save" soft key. The date format is DD/MM/YYYY. To have the phone
automatically sync with a server, select "NTP" and select "On".
Basic Call functions
Making calls
Making an external call
An external call is the call made between desk phone and remote party by SIP protocol. Users will need a
line to send out the invite request. To set up a line and assign it to desk phone, please refer to the section
"SIP account Configuration".
To make an external call through default line:
Enter the number/IP address in pre-dialing page or select a record in phonebook/call log list. Then press
the Talk On key or OK key. The default outgoing line will be selected automatically for the call making.
To select line before making an external call:
Enter the number/IP address in pre-dialing page or select a record in phonebook/call log list. Select "Acc"
soft key, select the desired line and press "Dial".
Anonymous call
To configure the anonymous call function, users must use the master desk phone. Enter the "Services"
menu. Input the desk phone user password. Select the SIP account to enable/disable the anonymous
feature. There are 2 items to configure. When "Anonymous call" setting is enabled, the phone's phone
number is prevented from being displayed when calling other numbers. When "Anonymous call rejection"
setting is enabled, any caller who has explicitly restricted his/her number is prevented from calling this
desk phone.
15
Advertisement
Table of Contents
