Connecting To Monitor; Connecting To Power - Samsung SCV-2060 User Manual

connection

CONNECTING TO MONITOR

Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.
As the connecting method varies with the instruments, refer to the manual supplied
with the instrument.
If necessary, you can connect the monitor to the REMOTE jack on the back of your camera.
Only connect the cable when the power is turned off.

CONNECTING TO POWER

Connect the adaptor to the power input terminal as shown in the fi gure below.
Output of the adaptor should be either one of AC 24 V, 1.5 A or DC 12 V, 1.0 A. Note that
using DC 12 V may cause lower heater temperature.
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size (AWG) #24 (0.22mm2) #22 (0.33mm2) #20 (0.52mm2) #18 (0.83mm2)
Resistance ( /m)
Voltage Drop (V/m)
As shown in the table above, voltage decreases as the wire gets longer. Therefore
use of an excessively long adaptor output line for connection to the camera may
affect the performance of the camera.
* There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
CCTV Camera
---- Power Input Terminal
0.078 0.050
0.028 0.018
Monitor
0.030 0.018
0.011 0.006
English_19