Connecting A Monitor; Connecting Power - Samsung Supreme SHC-735 User Manual

Installation Procedures
• When Using a C Mount Lens
1. Remove the protective glass cover at the front
of this product and turn the C-Mount Adapter
clockwise to install it.
2. Turn the C-Mount lens clockwise to install it.
3. Set focus of camera using Back Focus Control Lever of camera side after combining
C-Mount lens.

Connecting a Monitor

Connect the Video OUT port on the rear panel of the camera to a monitor.
CCD Camera
• Since the connection procedure may differ depending on the type of monitor or
peripheral device to be connected, refer to the User Manual for the device to be
connected.
18
COLOR CCD CAMERA
Monitor
User's Manual
• Make sure to turn off the device to be connected before making any connections.
• Turn the 75 /Hi-Z switches of interim display devices to the Hi-Z position, and
the switches of any final device to the 75Ω position.
CCD Camera

Connecting Power

Since power specifications differ depending on the model, make sure to check your
model name and specifications before connecting power. You can connect power as
shown in the following figure.
For AC / DC power
• Since the power specification supports
both AC and DC, connect AC 24V,
500mA Adaptor or DC 12V, 500mA
Adaptor.
High Voltage Type (AC230V, 50Hz)
• Use AC230V, 50Hz power source For
SHC-735PH.
COLOR CCD CAMERA
Intermediate End monitor
19
User's Manual