Samsung SCV-3081 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SCV-3081
  6. User manual

Samsung SCV-3081 User Manual

High resolution wdr vandal-resistant dome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
High Resolution WDR Vandal-Resistant
Dome Camera
User Manual
SCV-3081

Advertisement

Table of Contents
loading

Related Manuals for Samsung SCV-3081

Summary of Contents for Samsung SCV-3081

  • Page 1 High Resolution WDR Vandal-Resistant Dome Camera User Manual SCV-3081...

  • Page 2: User Manual

    Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
  • Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCV-3081 SERIES • NTSC MODEL • PAL MODEL SCV-3081N SCV-3081P ■ MODEL DESCRIPTION • SCV-3081X _...

  • Page 4: Safety Information

    safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CAUTION: COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
  • Page 5 fi re or electric shock. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifi cations or attempted repair.) When cleaning, do not spray water directly onto parts of the product.

  • Page 6: Fcc Statement

    safety information FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation.

  • Page 7: Important Safety Instructions

    important safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi...

  • Page 8: Table Of Contents

    contents INTRODUCTION Features What’s included Component names and Functions INSTALLATION Disassembling Installing the camera on a ceiling or wall Adjust the panning and tilting while watching the monitor CONNECTION Connecting to Monitor Connecting to Power Using Coaxial Communications SETUP Menu Confi gration Menu Setup TROUBLESHOOTING Troubleshooting...

  • Page 9: Introduction

    VPS(Virtual Progressive Scan) Adopting Samsung's unique development, the VPS(Virtual Progressive Scan) enhances the sharpness of moving subject's outline. The VPS enables elective output in progressive mode using the existing interlaced input and effectively enhances the sharpness of captured pictures from video and still images.
  • Page 10 introduction DIS (Digital Image Stabilizer) The DIS function compensates for any camera movement, to produce more stable pictures. Miscellaneous Functions HLC (High Light Compensation), SENS-UP, REVERSE, D-ZOOM, SHARPNESS and PRIVACY functions are provided. Communication Coaxial communication methods are supported. - Protocol: Pelco Coaxitron The camera’s OSD is complimented by 18 languages.
  • Page 11 Check if the following items are included in the product package. High Resolution WDR Vandal-Resistant High Resolution WDR Vandal- Dome Camera Resistant Dome Camera User Manual SCV-3081 Quick Set-up Guide SCV-3081 SCV-3081 User Manual Quick Set-up Guide Video Output Cable...

  • Page 12: Component Names And Functions

    introduction COMPONENT NAMES AND FUNCTIONS OVERVIEW Dome Cover Shield Case Pan Base : control panning angle of camera 3.9 Vari-focal Lens Module 2.8 ~ 11.0mm (F1.2) Function Setup Switch : Display the OSD menu and move the cursor up, down, left,and right amend or confi...

  • Page 13: Installation

    installation DISASSEMBLING Using the L-wrench provided, loosen 3 screws by turning them counterclockwise and separate the dome cover. Dome Cover INSTALLING THE CAMERA ON A CEILING OR WALL Drill holes on the ceiling by matching to the holes on the case bed, and insert plastic anchors (HUD 5) (not included) fully into the holes.
  • Page 14 installation Connect Power and video cables and arrange them through the hole you want to pass when mounting the main body on the mounting bracket, note that not to damage or squeeze the cables. Video output jack Power input terminal Adjust the lens in a desired direction.
  • Page 15 ADJUST THE PANNING, TILTING & ROTATION WHILE WATCHING THE MONITOR 73˚ 174˚ 174˚ 176˚ Rotate Base Tilt Base Pan Base 176˚ You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism. Pan Base moves by 176˚ to each side direction and 352˚ on the whole. Tilt Base covers total 73˚...

  • Page 16: Connection

    connection CONNECTING TO MONITOR Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor. CCTV Camera Monitor As the connecting method varies with the instruments, refer to the manual supplied with the instrument. Only connect the cable when the power is turned off. If necessary, you can connect the monitor to the REMOTE jack on the back of your camera.

  • Page 17: Using Coaxial Communications

    * Standard voltage for camera operation : DC 12V ±10%, AC 24V ± 10% * There may be some deviation in voltage drop depending on the type of wire and the manufacturer.  Be sure to connect power only after all the installation is complete. ...

  • Page 18: Setup

    setup MENU CONFIGRATION Setup Menu ● LENS ● ● ● BRIGHTNESS SHUTTER EXPOSURE ● ● SENS-UP RETURN ● ATW ● OUTDOOR ● INDOOR WHITE BAL ● MANUAL ● AWC SET ● ● ● USER BLC BACKLIGHT ● ● SSDR ● ●...
  • Page 19 Press the Function Setup switch. Main setup menu is displayed on the monitor screen. MAIN SETUP 1.LENS Select the function Change the status by moving up or by moving the 2.EXPOSURE down direction of setup switch left or 3.WHITE BAL function setup switch.
  • Page 20 setup EXPOSURE When the SETUP menu screen is displayed, MAIN SETUP select EXPOSURE by using the Function 1.LENS Setup switch so that the arrow indicates 2.EXPOSURE 'EXPOSURE'. 3.WHITE BAL Select a desired mode using the Function Setup switch. BRIGHTNESS : Adjusts the video brightness. EXPOSURE SETUP 1.BRIGHTNESS SHUTTER : You can select shutter mode.
  • Page 21 RETURN : Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.  If you set the Function Setup switch to 'AUTO' mode, You can adjust the brightness by increasing or decreasing the limit value. (x2~x512) ...
  • Page 22 setup  White Balance may not work properly under the following conditions. In this case select the AWC mode. When the color temperature of the environment surrounding the subject is out of the control range (e.g. clear sky or sunset). When the ambient illumination of the subject is dim.
  • Page 23 Change the color / brightness of the masking area. (Black, Red, Blue, Cyan, Magenta) TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced. OFF : Not being used SSDR(Samsung Super Dynamic Range) : SSDR illuminates darker areas of an SSDR SETUP image while retaining the same light level...
  • Page 24 setup < WDR ON > < WDR OFF >  Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. ...
  • Page 25 This function reduces the background noise in a low luminance environments. When the SETUP menu screen is displayed, MAIN SETUP select 'SSNR3' by using the Function Setup 1.LENS switch so that the arrow indicates 'SSNR3' . 2.EXPOSURE Select a desired mode using the Function 3.WHITE BAL Setup switch.
  • Page 26 setup AUTO SETUP 1.BURST MODE 2.COLOR B/W DURATION FAST DWELL TIME 5 SEC 3.B/W COLOR DURATION FAST DWELL TIME 10 SEC 4.RETURN BURST MODE : You can turn on or off the burst signal on B/W mode. DWELL TIME : You can select the duration time about changing the day/night mode.
  • Page 27 When the SETUP menu screen is MAIN SETUP displayed, select ‘PROFILE’ by using the 1.LENS Function Setup switch so that the arrow 2.EXPOSURE indicates ‘PROFILE’. 3.WHITE BAL Select a desired mode using the Function 4.BACKLIGHT Setup switch according to the picture 5.SSNR3 display you want.
  • Page 28 setup When the SETUP menu screen is displayed, MAIN SETUP select ‘SPECIAL’ by using the Function Setup 1.LENS switch so that the arrow indicates ‘SPECIAL’. 2.EXPOSURE Select a desired mode using the Function 3.WHITE BAL Setup switch. 4.BACKLIGHT 5.SSNR3 IMAGE ADJ : 6.DAY/NIGHT AUTO 1) When the SPECIAL menu screen is...
  • Page 29 REVERSE : You can reverse the picture. OFF : You don’t reverse the picture. H-REV : You can fl ip the picture horizontally on the screen. V-REV : You can fl ip the picture vertically on the screen. HV-REV : You can fl ip the picture horizontally and vertically on the screen. PIP(Picture in Picture) : Displays a PIP SETUP full-size image along with the thumbnail to...
  • Page 30 setup Use the Function Setup switch to move to a desired letter and select the letter by pressing the switch. Repeat this to enter multiple letters. You can enter up to 15 letters. Enter a title, move the cursor to ’POS’ and press the Function Setup switch.
  • Page 31 INTELLIGENCE: Commands the camera to motion-detect and trace an object. MOTION : Select motion types to INTELLIGENCE detect. 1.MOTION OFF : Not being used. 2.DETECT BOX 3.ALARM OUT DETECTION : Since the camera 4.DETECT AREA detects motion without 5.MASK AREA any additional external 6.SENSITIVITY sensor, you can monitor...
  • Page 32 setup · IN/OUT : Detects all objects entering and exiting the fenced area. - RETURN : Select this to save the POSITION menu settings and return to the TRACKING menu. RETURN : Select this to save the TRACKING menu settings and return to the INTELLIGENCE menu.
  • Page 33 RETURN : Select this to save the MASK AREA menu settings and return to the INTELLIGENCE menu. SENSITIVITY : Set the sensitivity of the motion detection. When adjusting the sensitivity, note that the lower the level means the higher sensitivity. DET.
  • Page 34 setup LANGUAGE : You can select the menu language according to your requirements. NTSC : Korean, English, French, Spanish, Japanese, Portuguese, Taiwanese PAL : English, Chinese, German, Italian, French, Spanish, Russian, Czech, Polish, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu.

  • Page 35: Troubleshooting

    troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. PROBLEM SOLUTION Nothing appears on the screen. Check that the power cord and line connection between the camera and monitor are fi...

  • Page 36: Specifi Cations

    specifications SPECIFICATIONS SCV-3081N SCV-3081P VIDEO Imaging Device 1/3’’ Super HAD CCD ( Double Scan ) Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Scanning System 2 : 1 Interlace / Progressive (VPS) Synchronization Internal / Line Lock Frequency...
  • Page 37 SCV-3081N SCV-3081P Camera Title Off / On (Displayed 15 characters) Day & Night Auto (ICR) / EXTERNAL/ Color / B/W Backlight Compensation Off/ USER BLC / HLC / SSDR /WDR Wide Dynamic Range 128x (52dB) 160x (54dB) Dynamic Range (SSDR) Off / On Digital Noise Reduction (SSNR Ⅲ...

  • Page 38: Dimension

    specifications DIMENSION Unit : mm(Inches) 38_ specifi cations...
  • Page 39 MEMO...
  • Page 40 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungcctvusa.com...

Table of Contents