Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
Page 3
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description. ■ SCV-5083R SERIES • NTSC MODEL • PAL MODEL SCV-5083RN SCV-5083RP ■ MODEL DESCRIPTION • SCV-5083RX _ SIGNAL SYSTEM • SIGNAL SYSTEM...
Page 4
safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
Page 5
9. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
safety information FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents...
contents inTroDuCTion Features Components and Accessories COMPONENT NAMES AND FUNCTIONS insTallaTion Before installation Installation Adjusting the monitoring direction for the camera ConnECTion Connecting to Monitor Connecting to Power Using Communications CamEra oPEraTion Menu Configuration Menu Setup TroublEshooTing Troubleshooting sPECifiCaTions Specifications Dimension 8_ contents...
Page 9
Without an external sensor, you can use this product to detect motion and generate alarms and thus more efficient monitoring can be achieved. y ssnr4 (samsung super noise reduction) function High performance W7 Chip removes noises of GAIN resulting from the low light level and shows a vivid, high definition video even in the dark place.
ComPonEnT namEs anD funCTions Dome Cover shield Case rotate base : control rotating angle of camera. Vari-focal lens module : 3 ~ 10.0mm (F1.4). ➍ function setup switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item.
Installation bEforE insTallaTion Ensure you read out the following instructions before installing the camera: y You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. y Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire.
Page 13
installing the camera on a ceiling or wall 1. Drill holes on the ceiling by matching to the holes on the case bed, and insert plastic anchors (HUD 5) (not included) fully into the holes. Fix the case bed on the ceiling by using screws .
Page 14
3. Adjust the lens in a desired direction by referring to the “Adjusting the monitoring direction for the camera”section. 4. Close the dome cover. To ensure waterproofing, tight up the fixing bolts using the L-wrench. Shield case Dome cover The installation should be done by qualifi ed service personnel or system installers. If the ceiling material is not strong enough to hold the installation screws, the camera may fall off.
aDJusTing ThE moniToring DirECTion for ThE CamEra Tilt Lens rotation ` Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation.
ConnECTing To moniTor Connect the video out port of the camera to the video input port of the monitor. SCV-5083R Monitor y As the connecting method varies with the instruments, refer to the manual supplied with the instrument. y Only connect the cable when the power is turned off.
When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm #22 (0.33mm #20 (0.52mm #18 (0.83mm Resistance value(Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 y As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.
Page 18
RS-485 communications Using RS-485 communication, the camera menu can be accessed using Samsung Techwin’s System Controller or the DVR. - for accessing the camera from a computer Use a RS-485 converter to connect the camera’s control port with the computer’s serial cable.
camera operation mEnu ConfiguraTion main sETuP ● BASIC ● DAY/NIGHT ● BACKLIGHT PROFILE ● ● INDOOR ● USER SSDR ● ● ● ● OUTDOOR ● INDOOR WHITE BAL ● AWC SET ● MANUAL ● MERCURY ● ● ● BRIGHTNESS LENS SHUTTER EXPOSURE...
Page 20
camera operation MAIN SETUP Select the function ▶ 1. PROFILE BASIC Change the status using the Function using the Function 2. SSDR Setup switch. Setup switch. 3. WHITE BAL 4. EXPOSURE 5. BACKLIGHT 6. SPECIAL 7. EXIT SAVE 1. Press the Function Setup switch. y Main SETUP menu is displayed on the monitor screen.
Page 21
If you select the ITS, the shutter will be set to 1/200 sec. Noise can be detected at night. ssDr (samsung super Dynamic range) If an object has a large variance between bright and dark areas, it will keep bright areas bright and make selected dark areas bright, so that the overall brightness can be maintained.
Page 22
camera operation White bal (White balance) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is MAIN SETUP displayed, select ‘White Bal’ by 1. PROFILE BASIC using the Function Setup switch so 2. SSDR that the arrow indicates ‘White Bal’...
Page 23
EXPosurE 1. When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Function Setup switch so that the arrow indicates ‘EXPOSURE’. 2. Select a desired mode using the Function Setup switch. EXPOSURE SETUP ▶ BRIGHTNESS ---- ---- y brighTnEss : Adjusts the video LENS brightness.
Page 24
camera operation baCKlighT The camera uses our own W7 chips that are designed to clearly display the object and the background despite severe reverse light. 1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup switch. so that the arrow indicates ‘BACKLIGHT’. 2.
Page 25
y WDr : When there are both bright and dark areas at the same time, this mode makes both areas distinctive. - LEVEL : Select one from low, WDR SETUP med, high to adjust the LEVEL MIDDLE ▶ 1. brightness of the WDR RETURN setup.
Page 26
camera operation sPECial 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. 2. Select a desired mode using the SPECIAL SETUP Function Setup switch. DISPLAY ▶ 1. y DisPlaY COMM ADJ IMAGE ADJ...
Page 27
PROTOCOL. 6. COAX 7. RETURN (SAMSUNG- T,Samsung-E, Pelco-D, Pelco-P, Panasonic, Bosch, Honeywell, Vicon, AD, GE) - CAM ID : Determines the camera's identification number (between 0 and 255). - BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps. - UART MODE : You can select NONE, EVEN or ODD for the parity bits.
Page 28
camera operation - V-REV : Flip an image vertically. - D-ZOOM : You can use a digital zoom of x1 ~ x16. - SHARPNESS : Select a mode to adjust the thickness of an image’s sharpness. Increase or decrease the level of each mode to adjust the level of sharpness.
Page 29
- EXTERN : Ground to the grounding terminal to allow automatic switching between COLOR and B/W (Black/White). - COLOR : The picture is always displayed in color. - B/W : The picture is always displayed in black and white. y DEfog : You can use the defog mode to allow the camera to automatically detect the fog density of the screen and display a clear image despite smog, fog or general poor visibility.
camera operation - SEL POS/ XPOS/ YPOS : Adjust the size and position of the selected area. - RETURN : Return to the SPECIAL menu. y Dis (Digital image stabilizer) : This function mitigates any picture movement due to external factors such as wind. y ViDEo analYTiCs VIDEO ANALYTICS ❶MM I f the SPECIAL menu screen is...
Page 31
- MOTION : This product MOTION DET generates signals DET. SIZE ▶ each time an object DET. AREA movement is detected NON DET. AREA in the four areas of 4. INDICATOR the screen so efficient ALARM OUT monitoring can be RETURN achieved.
Page 32
camera operation - INTELLIGENCE : Set the intelligent INTELLIGENCE video detection SENSITIVITY ▶ ---- ---- function. DET. SIZE y SENSITIVITY : Set the sensitivity 3. FENCE of the motion 4. APPEAR detection. When 5. INDICATOR you adjust the ALARM OUT higher level, the RETURN more sensitive.
Page 33
2) AREA FENCE AREA FENCE - SEL POS : Selects a SEL POS ▶ POS1 position from X POS ------ POS1 ~ POS4. Y POS ------ - X POS / Y POS : Adjust DIRECTION the size and position of the RETURN selected area fence.
Page 34
camera operation Before use, set the max/min movement size within the range. Depending on the shape of an object, there can be errors in size detection. From the top of the screen, a max of sixteen objects can be expressed. If the camera shoots an object a short distance away, the video analysis function can be degraded.
Page 35
troubleshooting TroublEshooTing If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problems Troubleshooting Nothing appears on the screen. y Check that the power cord and line connection between the camera and monitor are properly connected.
Page 36
specifications sPECifiCaTions sCV-5083rn sCV-5083rP Video Imaging Device 1/3” 1.3M CMOS Total Pixels 1312(H) x 1069(V) Effective Pixels 1305(H) x 1049(V) Scanning System Progressive Scan Synchronization Internal H : 15.734KHz / V : 59.94Hz H : 15.625KHz / V : 50Hz Frequency Color : 1000 TVL Horizontal Resolution...
Page 37
Basic, Day & Night, Backlight, ITS, Indoor, User Alarm 1 Out Coaxial Control ( SPC-300 Compatible ),RS-485 Communication Coax : Pelco-C (Coaxitron) RS-485: Samsung-T, Samsung-E, Pelco-D, Pelco-P, Protocol Panasonic, Bosch, Honeywell, Vicon, AD, GE IR Distance Environmental Operating Temperature -30°C ~ +55°C / Less than 90% RH ※...