Table of Contents
Advertisement
light
ode.)
de.)
SSNR3
This function reduces the background noise in a low luminance environments.
1.
When the SETUP menu screen is displayed,
select 'SSNR3' by using the Function Setup
switch so that the arrow indicates 'SSNR3'.
2.
Select a desired mode using the Function
Setup switch.
ON : Activates SSNR3 so that noise is
reduced.
OFF : Deactivates SSNR3. Noise is not
reduced.
3.
Set the SSNR3 mode to 'ON' and press the Function Setup switch. Then you can
adjust the noise reduction level.
You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the 'EXPOSURE' menu is 'OFF'.
When adjusting the noise reduction level in the SSNR3 mode, remember that the higher the level
set, the more the noise level will be reduced, as will the brightness of the image.
DAY/NIGHT
You can display pictures in color or in black and white.
1.
When the SETUP menu screen is displayed,
select 'DAY/NIGHT' by using the Function
Setup switch so that the arrow indicates
'DAY/NIGHT'.
2.
Select a desired mode using the Function
Setup switch according to the picture
display you want.
AUTO : The mode is switched to 'Color'
in a normal environment, but
switches to 'B/W' mode when
ambient illumination is low. To set up the switching time for AUTO mode,
press the Function Setup switch. You can turn on or off the burst signal
on B/W mode.
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.SSDR
OFF
5.BACKLIGHT
OFF
6.SSNR3
ON
7.DAY/NIGHT
AUTO
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.SSDR
OFF
5.BACKLIGHT
OFF
6.SSNR3
ON
7.DAY/NIGHT
AUTO
8.SPECIAL
English_27
Advertisement
Table of Contents
