Samsung SCV-2060 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SCV-2060
  6. User manual
Samsung SCV-2060 User Manual

Samsung SCV-2060 User Manual

High resolution vandal dome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
High Resolution Vandal
Dome Camera
User Manual
SCV-2060

Advertisement

Table of Contents
loading

Related Manuals for Samsung SCV-2060

Summary of Contents for Samsung SCV-2060

  • Page 1 High Resolution Vandal Dome Camera User Manual SCV-2060...

  • Page 2: User Manual

    Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
  • Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCV-2060 SERIES • NTSC MODEL • PAL MODEL SCV-2060N SCV-2060P ■ MODEL DESCRIPTION • SCV-2060X _ SIGNAL SYSTEM •...

  • Page 4: Safety Information

    safety information CAUTION fi RISK OF ELECTRIC SHOCK. DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CAUTION: COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
  • Page 5 If this product fails to operate normally, contact the nearest service center. never ctric disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifi cations or attempted repair.) When cleaning, do not spray water directly onto parts of the product. doing so may cause fi...

  • Page 6: Fcc Statement

    safety information FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation.

  • Page 7: Important Safety Instructions

    important safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi...
  • Page 8 contents INTRODUCTION Features What’s included Component names and Functions INSTALLATION Installation Adjusting the monitoring direction of the camera Adjusting the monitoring direction of the camera CONNECTION Connecting to Monitor Connecting to Power Using Coaxial Communications OPERATING YOUR CAMERA Menu Confi guration Menu Setup TROUBLESHOOTING Troubleshooting...
  • Page 9 Excellent Sensitivity The built-in high sensitivity COLOR CCD produces a clear image. SSNR3 (Samsung Super Noise Reduction) Function The high-performance W-V DSP chip effectively removes low-light gain noise and afterimage to provide clear images even in dark environments.
  • Page 10 WHAT’S INCLUDED Check if the following items are included in the product package. High Resolution Vandal Dome Camera SCV-2060 High Resolution Vandal Dome Camera SCV-2060 Quick Set-up Guide SCV-2060 Main Body Instruction Manual Quick Set-up Guide SCV-2060/2080 Series Quick Install Guide The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage"...

  • Page 11: Component Names And Functions

    COMPONENT NAMES AND FUNCTIONS FRONT Dome Cover Inner cover Wing locker Rotate Base : Control rotating angle of camera. Vari-focal Lens Module Pan Base : Control panning angle of camera. Video Output Terminal to Monitor Function Setup switch : Display the menu on the screen and move the cursor to four directions to confirm status or changing a selected item.
  • Page 12 installation INSTALLATION Using the L-wrench provided, loosen 3 screws by turning them counterclockwise and separate the dome cover. Dome Cover Lift up the inner cover while gently Inner cover pressing both ends to separate it from the unit. Main Body Loosen 3 screws by turning them (Camera) counterclockwise, press both left and...
  • Page 13 Affi x the mounting template(supplied) to the mounting surface. Drill holes (diameter 5mm, more than 35mm deep) on the ceiling by matching to the holes on the case bed, and insert plastic anchors (HUD 5) fully into the holes. Fix the case bed on the ceiling by using Tapping Screws (TH M4xL30).
  • Page 14 installation INSTALLING THE CAMERA ON A CEILING OR WALL WITH PIPELINE Secure the mounting bracket on the place you want to mount it after combining the mounting bracket with the pipeline. Hole for 3/4° pipe (JIS B 0202-1966) Connect power input and video output cables with the each cable from pipeline.
  • Page 15 REINSTALL THE DOME COVER TO THE MAIN BODY Adjust the lens in a desired direction. Secure the inner cover to the main unit. Assemble the Dome Cover. For waterproof purpose, fi x and secure the bolt using L-wrench provided. Case Main Body (Camera) Inner cover Dome Cover...
  • Page 16 installation ADJUSTING THE MONITORING DIRECTION OF THE CAMERA Panning 0˚ Tilting Lens rotation 60˚ ~ 80˚ 1) W 1) You can adjust the camera direction only when the camera is fi xed on the ceiling. You can adjust the camera to point in any direction by using the pan, Tilt mechanism. •...
  • Page 17 • The case of ceiling installation 1. After mounting the camera on the ceiling, adjust the panning angle according to the monitoring direction. You should adjust the panning angle lest that the video be displayed upside down on the monitor. 2.
  • Page 18 3) POLE MOUNT ADAPTOR(SCX-300PM) This is an adaptor for WALL MOUNT ADAPTOR (SCX-300WM) installation on a pole whose diameter is bigger than 80mm. 4) CORNER MOUNT ADAPTOR (SCX-300KM) This is an adaptor for WALL MOUNT ADAPTOR (SCX-300WM) installation on the corner of wall joint. usin * Th 18_ installation...

  • Page 19: Connecting To Monitor

    connection CONNECTING TO MONITOR Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor. CCTV Camera Monitor As the connecting method varies with the instruments, refer to the manual supplied with the instrument. If necessary, you can connect the monitor to the REMOTE jack on the back of your camera. Only connect the cable when the power is turned off.

  • Page 20: Using Coaxial Communications

    connection  Be sure to connect power only after all the installation is complete.  Note that AC / DC adaptor is not supplied with camera.  Ground should be connected to the GND terminal. USING COAXIAL COMMUNICATIONS Coaxial Communications System OSD Control method CAMERA CONTROLLER...

  • Page 21: Operating Your Camera

    Operating Your Camera MENU CONFIGURATION MAIN SETUP ● LENS ● ● ● BRIGHTNESS SHUTTER EXPOSURE ● ● SENS-UP RETURN ● ATW ● OUTDOOR ● INDOOR WHITE BAL ● MANUAL ● AWC SET ● ● SSDR ● ● ● BACKLIGHT ● ●...
  • Page 22 Operating Your Camera MAIN SETUP 1.LENS Select the function Change the status 2.EXPOSURE using the Function using the Function Setup switch. Setup switch. 3.WHITE BAL 4.SSDR 5.BACKLIGHT 6.SSNR3 7.DAY/NIGHT AUTO 8.SPECIAL 9.EXIT SAVE Select a desired function using the Function Setup switch. Place the cursor over a desired item.
  • Page 23 EXPOSURE When the SETUP menu screen is displayed, MAIN SETUP select ‘EXPOSURE’ by using the Function 1.LENS Setup switch so that the arrow indicates 2.EXPOSURE ‘EXPOSURE’. 3.WHITE BAL Select a desired mode using the Function Setup switch. BRIGHTNESS : Adjusts the video brightness. EXPOSURE SETUP SHUTTER : You can select the shutter.
  • Page 24 Operating Your Camera  If you set the Function Setup switch to ‘AUTO’ mode, You can adjust the brightness by increasing or decreasing the shutter speed. (x2 ~ x512)  Note that the higher the zoom level, the brighter the screen, but the more likely it is that an after-image will appear.
  • Page 25 SSDR (SAMSUNG SUPER DYNAMIC RANGE) SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas. When the SETUP menu screen is displayed, MAIN SETUP select ‘SSDR’...
  • Page 26 Operating Your Camera HLC (High Light Compensation) : If the scene contains extremely bright light areas such as; from car headlight, the light can mask out much of the on-screen detail. LEVEL : Adjusts the brightness level of a monitoring area. LIMIT : Enable to change the operating condition.
  • Page 27 SSNR3 This function reduces the background noise in a low luminance environments. When the SETUP menu screen is displayed, MAIN SETUP select ‘SSNR3’ by using the Function Setup 1.LENS switch so that the arrow indicates ‘SSNR3’. 2.EXPOSURE Select a desired mode using the Function 3.WHITE BAL Setup switch.
  • Page 28 Operating Your Camera BURST MODE : You can turn on or AUTO SETUP off the burst signal ▶ 1.BURST MODE on B/W mode. 2.COLOR→B/W DURATION : You can select the day/ DURATION FAST night switching point. DWELL TIME 3 SEC DWELL TIME : You can select day/ 3.B/W→COLOR DURATION...
  • Page 29 Select a desired mode using the Function SPECIAL Setup switch. 1.IMAGE ADJ 2.MONITOR 3.CAM TITLE 4.SYNC 5.MOTION DET 6.PRIVACY 7.DIS 8.LANGUAGE ENGLISH 9.RETURN IMAGE ADJ : 1) When the SPECIAL menu screen is displayed, select ‘IMAGE ADJ’ by using the Function Setup switch so that the arrow indicates ’IMAGE ADJ‘. 2) Select a desired mode using the Function Setup switch.
  • Page 30 Operating Your Camera CRT : Please select this menu item LCD MONITOR when using a CRT monitor. You ▶ GAMMA 0.55 can change the PED level, color PED LEVEL IIIII IIIIIIIIIIIIIIII gain in the sub menus. COLOR GAIN IIIIIIIIIIIIIII IIIIII USER : Please use this menu item when RESET using a monitor other than...
  • Page 31 SYNC : In areas where the supply is at SYNC 60Hz(NTSC), 50Hz(PAL) frequency, you can synchronize the output PHASE phase of multiple cameras using the power synchronization function ( L i n e - L o c k ) w i t h o u t u s i n g a Press SET to Return synchronization signal generator.
  • Page 32 Operating Your Camera PRIVACY : Mask an area you want to hide on the screen. When the SPECIAL menu screen is PRIVACY AREA SETUP displayed, press the Function Setup 1.AREA AREA1 switch so that the arrow indicates 2.MODE ‘PRIVACY’. 3.MASK COLOR GREEN Set up the mode using the Function 4.MASK TONE...
  • Page 33 EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. SAVE : Save the current settings and exit the MAIN SETUP menu. NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu. RESET : Resets the camera settings to the factory defaults.

  • Page 34: Troubleshooting

    troubleshooting TROUBLESHOOTING If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. PROBLEM SOLUTION Nothing appears on the screen. Check that the power cord and line connection between the camera and monitor are properly connected.

  • Page 35: Specifications

    specifications SPECIFICATIONS SCV-2060N SCV-2060P VIDEO Imaging Device 1/3” Super HAD CCD Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Scanning System 2 : 1 Interlace Synchronization Internal/Line-lock Frequency H : 15.734KHz / V : 59.94Hz H : 15.625KHz / V : 50Hz Horizontal Resolution Color : 600 TV lines, B/W : 700TV lines...
  • Page 36 specifications SCV-2060N SCV-2060P Camera Title Off / On (Displayed 15 characters) Day & Night Auto (ICR) / Color / B/W Backlight Compensation BLC / HLC / Off Contrast Enhancement SSDR ( Off/On ) Digital Noise Reduction SSNR Ⅲ (Off / On) Digital Image Stabilization Off / On Motion Detection Off / On (8 programmable zones)
  • Page 37 DIMENSIONS °) English_37...

  • Page 38: Declaration Of Conformity

    Conformance to EN 55022 : 2006 EN 50130-4 : 2003 We, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s). Manufacturer SAMSUNG TECHWIN CO., LTD Legal Representative in Europe Signature Signature Full Name BONJENG GU...
  • Page 39 MEMO...
  • Page 40 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Park Tol Free : +1-877-213-1222, FAX : +1-310-632-2195 Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungtechwin.com...

Table of Contents